Would Replacement Square T-Bolt # 853208914 Fit In Thule Pro Bar Top Channel

Question

Question:

With this t bolt work with thule’s pro bar?

asked by: Dan

0

Expert Reply:

Yes, the T-bolt part # 853208914 would fit into the top channel of a Thule Pro Bar.

expert reply by: Jameson C

0

Answer 1

I spoke to my contact at Thule and they do have the M6 x 22mm T-bolts that come in the #THXADAPT12 as separate items. The part number is #853208914. This is sold as a single piece.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

The threaded section of the Thule Xadapt12 Watersports Adapter #THXADAPT12 measures 7/8" while the square head is 3/4" x 3/4" as you can see in the attached photo.

view full answer...

Answer 7

Yes, the Replacement Stainless Steel T-bolt #853-5648 that you referenced will fit the channel slot on the top of your Thule Aeroblade bars.

view full answer...

Answer 8

I have a couple of options for you for bolts that are compatible with the T-slots in the Wingbar Evo's but the Rhino Rack item #RR92XB do not fit. Instead you will want one of the following: Replacement Square Head Bolt - 6 mm x 61 mm item…

view full answer...

Answer 9

The Rhino-Rack Ski and Fishing Rod Carrier #RR572 will allow you to mount the carrier to the Pioneer Platform #JA8215 in the integrated T-slots. You are correct that there will not be clearance for the reel of to hang unless mounted at the very edge…

view full answer...

Answer 10

Yes, the T-bolts of the Rhino-Rack Fishing Rod Carrier - Locking - 8 Fishing Rods #RR574F will fit the T-slot channels of Thule crossbars, including the aero bars.

view full answer...

Answer 11

The Rhino-Rack #RR576F Fishing Rod Holder for 11 rods will not directly connect to the Pioneer rack, but I do have a couple of solutions. You can mount a pair of Rhino-Rack #RR43138B Accessory Bars to your Pioneer platform, then attach the 11 rod…

view full answer...

Answer 12

The Yakima LockNLoad Platform Rack for Crossbars part #Y05044-39 and Rhino-Rack Universal Pioneer Platform Rack for Crossbars part #RR42115BF are both great options for a 2016 Honda Pilot. They each come with crossbar clamps and will work great with…

view full answer...

Would Replacement Square T-Bolt # 853208914 Fit In Thule Pro Bar Top Channel

Product Page this Question was Asked From

Continue Researching