Coupler that's Easier to Lock than Bulldog Collar-Lok  

Your safety chains should have a maximum gross trailer weight rating, which is what you would need to go by to ensure they are properly rated for your 10,000 lb GVWR trailer. If they are then you can attach them to your Ford hitch; wrapping them…

I have attached a helpful article that explains trailer hitch balls and their capacities. As the article states, 2 inch balls are typically rated with a towing capacity between 3,500 lbs to 8,000 lbs. A 2-5/16 inch ball is normally rated to be able…

Hello Chris. There will be no need to access the computer system in your 2015 Ford F-150 in order to install the Tekonsha P3 #TK99UR brake controller. If your truck already has a 7-way, you will be able to plug the controller in using the included…

Hey Chris, Because the Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XTB clamps to the lip of the bedrails it won't be compatible with any tonneau cover. You would need Thule's stake pocket mounted version the TracRac SR #TH43002XT-508…

First you will need to remove the old hydraulic equipment. Remove the surge coupler or actuator, remove all the lines, and finally remove the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well. If you…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The 2" receiver for the EcoHitch item #EH87SR sticks out right through the middle of the air dam. I have attached a picture below that will show you what this front hitch looks like once installed. The EcoHitch Hidden Front Mount Trailer Hitch…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Thank you for including images, this was a great help to me understanding what you will need to do to equip your trailer with electric brakes. The best thing for you to do is to immobilize the surge coupler. To do this you can weld the inner part of…