How Does Gen-Y Torsion Adjustable Ball Mount Compare to Weight Distribution System  

The shock absorption from the Gen-Y Torsion 2-Ball Mount #325-GH-1324 will help cushion abuse on your trailer tongue and the tow vehicle. However, you need to make sure you have enough tongue weight for this to be effective. The optimal ride tongue…

I do have an option for you but the Timbren Trailer Suspension Enhancement System Light-Duty Trailers part #TTRA1702 is not going to soften your ride. It would most likely do just the opposite of that. The only option we really have for you to soften…

For a cushioned weight distribution shank that fits the 2-1/2 inch hitch size like what you have you'd want the part #325-GH-1102 which can provide up to 6-1/2 inches of drop. This has the torsion cushioning you are wanting as well.

The best air bag kit for your 2022 Ford F-350 that has a single rear wheel axle is the part #F95FV which has the 5,000 lb capacity you are wanting. Firestone bags are superior Air Lift bags. The ply rating of the rubber is higher, the attachment to…

Yes. You can use your existing weight distribution hitch with the Gen-Y Torsion 2 Ball Mount #325-GH-1324 without any additional components, but it is not the optimal setup. Gen-Y recommends that you use the Gen-Y Torsion Weight Distribution Shank -…

Hey Steve, Assuming that 17,600lb capacity is your trailer's GVWR you would be able to go with a 21k capacity ball mount from Gen-Y. You'll just want to determine how much of a rise/drop that you'll need to accommodate your trailer. To…

That is correct, you can swap out the spring bars on the #BXW0350 for higher rated spring bars. The head and the shank have a rating high enough to handle any of the spring bars. Changing the bars will alter the tongue weight range of the system…

The best way to determine what system will work for you is to know what your total tongue weight is. The total tongue weight is the tongue weight of your fully-loaded-ready-to-tow trailer added to the weight of any cargo you place behind the rear…

I called my contact at TorkLift and asked about the tongue weight for their SuperHitch Magnum Trailer Hitch Receiver, part #TLD1108-30. The overall weight capacity and tongue weight capacity is for the entire hitch and not just one receiver. To be…

The Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 6" Drop/Rise - 32K #GY79FR is not an older model. It is a newer model that has the rounded portion that is like a ramp on the ball mount to help with the lunette ring…

The Andersen Ultimate Fifth Wheel Connection Adapter part #AM3200 that you referenced has 9 inches of offset built into it. What that means is that ball that connects to the trailer's pin box is moved back 9 inches from the center line between…

The Gen-Y Torsion 2-Ball Mount #325-GH-1224 would work for your application but I recommend the Gen-Y Torsion Weight Distribution Shank #325-GH-1202. This is made specifically for use with a weight distribution system and would basically replace…