2 Inch Trailer Hitch for 2020 Acura RDX  

The Draw-Tite Class II trailer hitch part #36114 attaches to the RDX frame member using two weld nuts on each side. I've linked the installation instructions for you as a reference. As you can see in the provided photo, the receiver tube…

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #76268 which is a confirmed fit for your 2021 Acura RDX. In most cases it will not completely interfere with the hands free sensor. You will, however, need to kick your foot to either the…

All hitch expanders, like the etrailer.com #e43YR, will have a little play in them, and especially with this size. This is due to tolerances when building hitches and adapters and needing everything to fit, well, everything. The best way to combat…

Price does play a pretty important role when choosing a trailer hitch, but for your application you really need to use the EcoHitch Hidden Trailer Hitch Receiver #306-X7359 for transporting your e-bike with your 2017 Chevy Bolt EV. When you use an…

You may not be able to use an Adapter #e43YR with your Kuat bike rack and the Curt trailer Hitch Receiver #C49CR on your 2023 Mazda CX-30. Since the receiver is rated for 200lbs of tongue weight and the use of an adapter lowers the receiver capacity…

We do have pictures of a class III hitch installed on a 2021 Mazda CX-9 and I have attached a couple of them. I recommend going with the Draw-Tite Max-Frame Trailer Hitch Receiver item #76020 you were looking at. It is the most concealed hitch option…

The Kuat NV 2.0 2 Bike Platform Rack, #NV22G, and the Kuat NV 2.0 Base 2-Bike Platform rack, #BA22B. are both very similar bike racks. Both racks can be expanded to a 4-bike rack, #NA22G add-on for the NV 2.0 and #BA02B for the NV 2.0 Base, and both…

The Kuat NV 2.0 part #BA22B is basically the stripped down version of the #NV22B. The differences are that the BA22B has a matte black finish whereas the other rack has a metallic black finish and a stand to work on bikes in the event you needed to…

The Kuat NV 2.0 2 Bike Platform Rack, #NV22G, and the Kuat NV 2.0 Base 2-Bike Platform rack, #BA22B. are both very similar bike racks. Both racks can be expanded to a 4-bike rack, #NA22G add-on for the NV 2.0 and #BA02B for the NV 2.0 Base, and both…

The Kuat NV 2.0 base part #BA22B and the Kuat NV 2.0 Bike Rack for 2 Bikes #NV22G both can tilt away from the rear of the vehicle in the exact same way like you can see in the attached pictures.

As long as the fender is tightly installed on the bike and the hook is attached to the fender as close as possible to the top tube of the bike, the #BA22B should carry the town bike you mentioned with no problem whatsoever. I spoke with one of my…

On the Kuat NV 2.0 Base 2-Bike Platform Rack #BA22B the horizontal distance from the hitch pin hole to the center of the nearest bike rail is approximately 14-3/8-inches. The height of the unloaded rack when folded down is 11-7/8-inches relative to…