Load Stop and Straps to Carry Ladder on Malone AirFlow2 Aero Crossbars

Question

Question:

I’m planning on using this roof rack to transport a ladder. What accessories will fit the Malone airflow 2 for this application?

asked by: Jeff B

1

Helpful Expert Reply:

The Rhino Rack Load Stops part # RRRLH2 fit the Malone AirFlow2 crossbars like the part # MPG216 that you referenced. Using these with some straps like the Rhino-Rack Cam Buckle Cinch Straps # RRRTD35P would be a really solid choice to carry the ladder.

expert reply by: Jameson C

1

Answer 1

As long as the crossbars you use aren't wider than the widest part of the vehicle (usually the mirrors), which could be a safety problem or even illegal in some areas, you could certainly use longer crossbars than the 58 inch crossbars. Since…

view full answer...

Answer 2

view full answer...

Answer 3

I do have some options for you but the Load Stops for Rhino-Rack Vortex Aero Crossbars part #RRRLH2 that you referenced are not going to be sufficient to secure your Wenonah Spirit II Canoe because they don't offer enough support/stability. This…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 8

The Malone AirFlow2 Roof Rack #MAL84AR you were looking at will fit your 2024 Subaru Forester Wilderness edition. Our fit guide can be a little confusing since these particular crossbars say it fits all models, excluding Wilderness and Wilderness…

view full answer...

Answer 9

Hey Kathy, thanks for reaching out! I recommend using the 58" Malone AirFlow2 Roof Rack #MAL84AR for your 2022 Subaru Forester Wilderness as it will have enough overhang to comfortably fit and use both a cargo box and an awning. If you don't…

view full answer...

Answer 10

Hey James, yes the Thule TracRac CapRac part #TH29200XT will work for a roof rack that fits the top channels that are on your cap and is compatible with the Thule Hullavator kayak carrier part #TH898 as it can attach to the top channels of the load…

view full answer...

Answer 11

The Thule Hullavator Pro Kayak Carrier #TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit #TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to work…

view full answer...

Answer 12

Hi Chase, We can get you that same LockRack setup for 3 long boards, though we don't offer it in a package so you'll have to get the pieces separately, though it's just the 45 cm (17-3/4") base and open angle long arms. So exactly…

view full answer...

Load Stop and Straps to Carry Ladder on Malone AirFlow2 Aero Crossbars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching