Below Bed Base Rails for 2002 Ford F-250 and Demco Hijacker Autoslide 5th Wheel Trailer Hitch  

It sounds like the gears inside the Demco Autoslide 5th Wheel Trailer Hitch #DM6077 may be off/damaged. I have attached a copy of the instructions which on page 10 show the parts breakdown for the gear mechanism. This will allow you to turn the hitch…

It sounds like you want to know if the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider like the #DM8550034 will fit your 2022 Ram 3500 with 6-1/2 Foot Bed and OEM Prep Package. This will work for your Ram 3500, but you will also need the…

The head( #DM6081) of the 13K Demco Hijacker Autoslide weighs 65lbs, the base weighs 210lbs, and the above the bed brackets( #DM6003) 30lbs while the puck mounting under bed brackets( #DM6004) weigh 42lbs totaling to 305-317lbs. This will add weight…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

Having the puck system is a great feature. If you ever plan on loading the bed with mulch, sand or rock you'll quickly find that having rails permanently bolted to the bed floor is a real pain. Not only that, but the pucks look a lot better.…

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…