Recommended Trailer Tie Down for 2020 Harley Davidson Tri-Glide Ultra Trike  

In order to secure your 2018 Harley Davidson Tri Glide I recommend using the Tow-Rax Wheel Chock part #TWSPWM for the front wheel so long as it is not greater than 6-1/2" wide. Then in order to secure the two rear wheels I recommend using an…

Curt doesn't give great instructions for initial adjustment of the Curt Echo Mobile #C51180 but I'll see if I can help. First you need to set the output which is the first number. Drive 25 mph and apply brakes and if the brakes are too weak…

The difference between sensitivity and max output for the Curt Echo brake controller part #C51180 is that max output is the max braking power the controller would put out if it felt like it needed to apply them as hard as possible. So this needs to…

Curt has a recommended setup procedure outlined for the Curt Echo part #C51180 that is outlined in their install instructions for this controller but since not all trailer brakes apply the same way there isn't a standard setting you can use that…

For the initial settings when you first start the test drive, you should start with the lowest braking setting on the output of the Curt Echo #C51180. This initial setting is the same no matter the weight of your trailer. When you are testing the…

I would recommend you run through the setup process outlined in the attached instructions so that you have settings that work as ideally as possible with the trailer you have now. There isn't a generic setting we can recommend for a trailer based…

The K-Source Snap & Zap Custom Towing Mirrors part #KS81850 which are a fit for a 2017 Ford F-150 are made in China. If you are looking for a made in USA option we have two, the CIPA Custom Towing Mirrors part #CM11550 and Longview Custom Towing…

We have a few options for the slip on towing mirrors that fit your 2018 Ford F-150. I recommend going with the CIPA Custom Towing Mirrors #CM11550 as they have more of a custom look and an easier installation than other options. I have attached a…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…