Hidden Hitch Recommendation for 2020 Subaru Ascent

Question

Question:

Which hitch would you recommend for my 2020 Subaru Ascent?

asked by: Terry

0

Expert Reply:

For your 2020 Subaru Ascent the hitch I recommend is the EcoHitch part # 306-X7381 as it's only aftermarket options that installs behind the rear bumper panel to give you a totally hidden look when you aren't towing as you can cover it up. This also doesn't affect ground clearance like other options would as well since it doesn't hang below the rear bumper.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Between the Draw-Tite hitch #76253 and the EcoHitch #306-X7381 that both fit your 2019 Subaru Ascent if it were my money I would get the Draw-Tite. Both hitches will take about the same time for installation (2+ hours) but because the Draw-Tite costs…

view full answer...

Answer 2

For a hitch to carry your back rack on your 2022 Subaru Ascent I recommend the etrailer Trailer Hitch Receiver #e55ZR. This is a Class III hitch with a 2" receiver and is completely hidden with the bumper panel in place. Since it sits behind the…

view full answer...

Answer 3

Sounds like you either have the Draw-Tite Class II #36334 or Class III #75560 hitch receiver for your 2006 Subaru Legacy. While this is a custom fit hitch that should bolt right up no problem, the mounting brackets may have become bent during…

view full answer...

Answer 4

When the Draw Tite hitch part #75560 is installed on your 2008 Subaru Outback the hitch height measured from the top of the hitch opening to the ground is 13-1/2 inches.

view full answer...

Answer 5

Over the years we have found that Tekonsha brand wiring harnesses have the best quality. For your 2008 Subaru Outback Wagon, I recommend the T-One Vehicle Wiring Harness part #118461 as long as you do not have the sport model. For your 2017…

view full answer...

Answer 6

Draw-Tite offers a Class III Trailer Hitch Receiver for your 2006 Subaru Outback Wagon, part #75560e. If you look at the provided photo, you can see how the hitch appears below the bumper fascia. If you'll be using the hitch for towing,…

view full answer...

Answer 7

The Hidden Hitch, part #87446 and the Draw-Tite, part #75560 trailer hitches are made by the same manufacturer and are identical. I have attached a link to an installation video for the part #87446 you can check out. As you can see in the video, the…

view full answer...

Answer 8

The Draw-Tite Max-Frame Trailer Hitch Receiver #75560 referenced in your question is the correct trailer hitch for your 2007 Subaru Outback Wagon (excluding Sport) that has the dual exhaust. I have attached an image that shows this trailer hitch on…

view full answer...

Answer 9

The Draw-Tite Max-Frame Trailer Hitch Receiver #76253 that you referenced is made overseas. For a similar trailer hitch with the same hidden design we do have the Eco-Hitch #306-X7381, which is confirmed to fit your 2019 Subaru Ascent and is made…

view full answer...

Answer 10

For your 2023 Subaru Ascent I recommend the EcoHitch #306-X7381. I really like how this hitch fits behind the factory plastic bumper cover so when you're not using the hitch it's 100% hidden. To tow with this hitch you'll also need to…

view full answer...

Answer 11

For your 2017 Volkswagen Golf Alltrack the trailer hitch part #C11422 is a confirmed fit and then for wiring the part #C56391 is also a confirmed fit.

view full answer...

Answer 12

I spoke to Curt and their wiring harness #C56391 should not trip any errors or sensors on your 2017 VW Golf Alltrack. They did point out that if it did, any time a trailer isn't plugged in said errors or sensors would be tripped as the circuit…

view full answer...

Hidden Hitch Recommendation for 2020 Subaru Ascent

Product Page this Question was Asked From

Continue Researching