Replacement Jack for Trailer that Had Shelby 5756A  

Based on my research, the Fulton Round, Snap-Ring Swivel Marine Jack #FTJ120W0301 will be a perfect replacement for your Shelby 5756A trailer jack. This jack will allow you to use the existing snap ring jack mount on your trailer for installation.…

We have had customers report back to us that the Fulton Round Snap-Ring Swivel Jack #FTJ120W0301 fits the same mounting bracket as your current Shelby Model 5756 Trailer Jack and as such this is the option I recommend. This jack has a 1,200 lb lift…

They make snap ring pliers that are used to remove snap rings. It has two pins on the end that stick into the holes of the snap ring and when squeezed it will open up the ring enough to be removed. You might also try to use 2 regular pliers. With one…

Swapping the mounting hardware on a jack can be done, but it will depend on the specific mounting hardware of the jacks. Shelby jacks and parts are becoming more difficult to locate, so I would recommend replacing your Shelby hardware with something…

I was not able to find any information on the capacity or mounting bracket dimensions of the Shelby 5776A. We do carry the Fulton Round, Snap Ring Marine Jack #FTJ120W0301 which is a replacement for the Shelby 5756 boat trailer jack but I was not…

The Shelby #5776 is the direct replacement for the #5756, but we do not offer that particular jack. The Fulton #FTJ120W0301 that you referenced would make an acceptable replacement. The capacity and the amount of lift or travel is identical. Both…

What we have heard is that the Fulton #FTJ120W0301 does fit the mounting plate of the Shelby Jack 5764 like what you have so this would be a great solution for a trailer jack. This jack has a 1,200 lb lifting capacity as well.

Unfortunately, we don't offer a jack that would be compatible with your existing weld-on bracket. Atwood went out of business awhile back and their products are no longer available. I'd recommend having the existing bracket removed and…

Although we don't offer a direct replacement, as Shelby is no longer in business, the Fulton #FTJ120W0301 would be compatible with the snap ring base your Shelby 5776 used. The jack has a 1200 lb capacity and offers 10 inches of lift. I'll…

It is possible the Fulton Round, Snap-Ring Swivel Marine Jack #FTJ120W0301 will fit the same mount used by your Shelby 5776 jack but we do not have the exact dimensions of the mount used by your Shelby jack so you will need to take a quick…

We aren't going to have a jack that's going to bolt right up to the same mounting bracket your Shelby mounted to so your best option will be to cut off the old mounting bracket and weld on a new one like with what you could do with the Fulton…

We have a large selection of similar style swivel jacks that will be great replacement options for your Shelby model 5856a-24z. I recommend looking at the Fulton Round Snap-Ring Swivel Marine Jack #FTJ120W0301. This jack has a lift capacity of 1,200…