Will theFlash E Series Adjustable 2-Ball Mount part # FA42-00-2600 fit my 2020 Ram 1500  

On the Rapid Hitch Adjustable, Aluminum Ball Mount #AM3461 there is that pin on the ball part of the assembly that has a threaded hole in it. That threaded hole should be visible when the pin is in there correctly. You can use a 1/4 inch screw or…

There is an aluminum ball mount that will allow you to use both 1-7/8" and 2-5/16" hitch balls, but since there isn't a combo ball with those sizes together, you'd have to get the 1-7/8" ball separately. So you have two options…

The capacity for the lock set part number #FA86-00-3660 that you referenced is going to be the max capacity the ball mounts these are designed for have. That would be 10,000 lbs total trailer weight and 1,000 lbs tongue weight.

Well, it worked! I even had another guy come over and give it a read. It is possible that the many years of pushing and pulling on your balls have enlarged the hole they fit in causing the movement you are experiencing. You could disassemble the big…

So the answer to the exact adjustable ball mount you need really depends on the amount of rise or drop you require. If you aren't sure how to measure for that, I've added a link to a help article detailing how to determine that. With that in…

To get an aluminum adjustable ball mount that can have a 1-7/8 inch ball on it you would need to replace the balls of the # FA42-00-2400 with the part #DTBM23 and then you would have a 1-7/8 inch ball and a 2 inch ball.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could find…