No Power To Cameras On Trailer With Furrion Camera System Using 2019 Chevy Truck


Hello, I have a 2020 Rockwood Mini Lite 2507S, I recently purchased the furrion vision S camera system. The back shark fin was a piece of cake. The marker light cameras are a nightmare. I took off the old light, I have two wires black and white. I’m pretty sure the black is the ground and the white is the power. So the camera has 3 wires. Black-ground , red - light , brown-camera. I connected everything as per the directions... light and camera to the positive white wire in the camper. I get the light on no problem but the camera does not get power. There is a blue LED light that should come on. It didn’t. I tried the other side, same thing...please help!!!! I’m losing my mind here!!! Thank you!!!


Expert Reply:

The reason you have power to the lights but not the side cameras on the Furrion Vision S Wireless RV Observation Camera System part # FCE48TASL-05 or part # FCE48TASL-07 is a problem with the tow vehicle (2019 Chevrolet Silverado 1500) not the wiring. This is actually a know issue on the new GM trucks since they use an odd trailer lighting circuit system which doesn't produce enough power for the cameras. Therefore, you need to use the 7-Way Vehicle Power Adapter Cable for Furrion RV Observation Camera part # FR74FR and that will fix your problem with the cameras getting power.

expert reply by:
Conner L

Products Referenced in This Question

Product Page this Question was Asked From

Follow up Questions

Similar Expert Q&A Pages

See More Q&A Expert Answers >>