Replacement Bearings and Seal for Trailer Hub # AKHD-545-35-EZ-K
Question:
Hi Folks, Back in June 2018 I purchased a some trailer hub kits for my boat trailer # AKHD-545-35-EZ-K. I am getting ready to service and put in some new wheel bearings. I noticed some kits come with the bearing race, the ring that the bearings glide over. I noticed your bearing kits dont include these. Do you know if these are necessary for my application, and if they should be changed when I do the bearings? Thanks so much. Regards,
asked by: Joseph G
0
Expert Reply:
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Recommended Replacement Hub/Drum and Brake Assembly for Typical Dexter 3500 lb Axle
- Replacement Hub for AxleTek Hub # BD2-545-17
- Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Replacement Brake Drums and Brake Assembly Parts for Lance 1685 Travel Trailer
- How to Determine Trailer Axle Capacity to Find Parts to Add Brakes to Trailer
- Pre-Greased Hub/Drum for 3500 lb Spindles on 2018 R Pod 178 and Four Winns D0210S02 Trailer
- How To Find Correct Replacement Hub/Drum for Jayco Eagle
- Parts Needed to Add Brakes to 3,500 lb Trailer Axle
- Trailer bearings and Seals For Lippert 3500 Lb Axle on Jayco Jay Flight
- Replacing Lippert 3,500 Pound Axle with 76 Inch Spring Seat Length
- Parts Needed to Add Electric Brakes to Utility Trailer That Currently has Idler Hubs
- How to Select Replacement Hub/Drums for Boat Trailer
- Correct Hub/Drum for 2017 Gulf Stream Vintage Cruiser 19ERD
- What Grease Does Trailer Hub # AKHD-545-35-EZ-K Use as Replacement
- Hub and Drum Recommendation for Dexter 3,500 lb Trailer Axle with Brake Assemblies
- Can I Replace Standard Spindles with EZ-Lube Spindles Without Replacing the Entire Axle Assembly
- Should Both Axles Have Brakes on a Tandem Axle Trailer
- Replacement Bearings/Seals for Haulmark Model TH85X20WT2 Tandem Axle Enclosed Cargo Trailer
- Replacement Hubs for 5x8 Utility Trailer and 12 Inch Wheels
- Swapping 5 Lug Hub Drum for EZ Lube Spindle with 6 Lug Hub Drum for Standard Spindle
- eTrailer Axle Technology Trailer Hub and Drum Assembly compared to Titan Hub and Drum
- Which Grease Should be Used with a Dexter Trailer Axle
- What Size Wire Should be Used for Trailer Brake Wiring on a 28 Foot Enclosed Cargo Trailer
- Is Mobile 1 Synthetic Tube Grease Good for Trailer Bearings
- How to Select the Correct Hub to Change Out a 4 on 9.44 Inch Bolt Circle Wheels with 5 on 4-1/2
- How To Find Correct Hub/Drum Replacements for Four Winns Trailer
- Replacement Hub for Enclosed Cargo Trailer with Lippert lc135-d Trailer Axle
- Drum Hub Assembly for Lippert 3,500 lb Axle