bing tracking image
Q & A Icon

Replacement Motor and Fan for my Ventline Roof Vent

Question:

Looking for replacement parts for the overhead vent in the bedroom of my 2005 Forrest River Cardinal. The vent is 13.25 x 13.25 and has the model # VD0434 on the screen. This vent does not appear to have ever had a fan or motor in it. The bracket for fan and motor are in there, but there is no access hole for wiring. Although there is prep wiring to add an A/C unit adjacent to the vent opening.

1

Helpful Expert Reply:

To add a fan and motor you need three components. First you need the motor and the Replacement 12V DC Motor part # BVD0218-00 is the one. Second the blade for it which is the Replacement Fan Blade part # BVD0215-00. LAstly you need the controls for the Replacement Screen Frame with Screen, Rocker Switch, and Wire part # BVC0573-31R will give you what you need to control it.

As far as the 12 Volt it is likely there is 12 Volts at the A/C prewire if it does not exist you will need to use your own wire. This can be ran from a nearby 12 volt source up to the fan. You may be able to use the same area to bring your 12 volts in that the A/C pre wire uses.

helpful expert reply by:
1

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>