Question:
I want to replace the single step on my 2010 Coleman Niagara with a double step. The issue that arises is that Coleman uses some kind of spacers on its steps- the step is 20inch wide, and the hangers are 24.5inch wide- too narrow for a 24inch replacement, and too wide for a 20inch replacement. Advice?
asked by: Matt C
Expert Reply:
For your 2010 Coleman Niagara, the dimensions you gave are a big help. There isn't a perfect fit for the current setup, so you will need to use what is called an outrigger. You can use the Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 20" Wide - 300 lbs # SMFP-2120 along with the Lippert Outriggers for Manual and Electric RV Steps # LC301704 to give you the correct fit and stability. You will use hardware # LC118155-72 to make them compatible.
Note--You may use an Outrigger on one side and factory mount on the other.
Mounting Hardware for Lippert Electric and Manual RV Steps
Lippert Outriggers for Manual and Electric RV Steps
Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 20" Wide - 300 lbs
Lippert Manual Pull-Out Step for RVs - Double - 7" Drop - 24-1/4" Wide - Steel - 300 lbs
