Trailer Hitch For 2018 Lincoln MKT For Towing a 4,000 Lb Trailer

Question

Question:

Need hitch for 2018 Lincoln MKT. Do you sell it and how much and what class hitch is it? I need to tow 4,000 lbs.

asked by: Jim D

0

Expert Reply:

I was able to confirm that the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75679 is a fit for the 2019 Lincoln MKT which is the only option. It is a great option with a custom fit design that does not require drilling into the frame of the Lincoln MKT. This will give a 2" receiver on the Lincoln that can tow 4,000 lbs however you do want to check the owner's manual to make sure you can tow 4,000 lbs safely.

For the trailer wiring, I recommend 7-way plug part # A10-7072VP which will connect to the factory port underneath the rear bumper of your Lincoln if you have the factory tow package.

If you do not have the factory tow package, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # C56095. To upgrade the 4-pole to a 7-way plug you will need 4-pole to 7-way plug adapter part # 337TC1474P. Please let me know if your trailer has electric brakes and you need a brake controller so I can make additional recommendations.

Since you plan on towing, you may consider the etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If you are not sure how much rise/drop you may need in a ball mount to tow your trailer level, I recommend to take a look at the helpful article I have attached about how to figure the amount of rise or drop you may need.

expert reply by: Heather A

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 5

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 6

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 7

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

This will depend on if you have a Dually #TL94PR or Single #TL67DR rear wheels on your 2021 Chevrolet Silverado 3500 long bed. These are a fit for the factory receiver, if you have or want to switch to a TorkLift Receiver #TL74FR this would use a…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

Yeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride…

view full answer...

Trailer Hitch For 2018 Lincoln MKT For Towing a 4,000 Lb Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching