Trailer Hitch for Ambulance on 2000 Ford E450 Cutaway Van Chassis  

I went to our warehouse and took a couple of measurements of the part #C15800. I have attached a photo of the trailer hitch and it has the dimensions noted. It measures 7 inches from the mounting lip to the top of the receiver opening and 9-1/2…

I spoke with my contact at CURT about Trailer Hitch #C14355. From side to side, the holes that would be furthest forward on the truck are 34 inches apart on center. The 2 sets that are at the end of the hitch are 33-11/16 inches apart on center.…

The drop of the Curt Class V #C15810, which is the distance from the top of the hitch crossbar to the underside of the vehicle frame where the hitch mounting flanges attach to the vehicle is 5.63 inches. The distance from the face of the receiver to…

I would be happy to help! The Curt Trailer Hitch Receiver #C15845 you were looking at is designed to fit the 2003 Ford F-350/450/550 Cab and Chassis motorhomes, and will not work on your 2003 Thor Four Winds Hurricane built on the Ford F53 chassis.…

I have a Class V hitch that would fit your 2001 E450 Chassis, part #41945. However, due to the large overhang of your vehicle because of the shuttle bus portion of the vehicle it is kind of hard for me to say for certain. The best recommendation I…

I was able to get a dimension sheet from my contact at Curt for the Curt Hitch part #C15800 that you referenced. See attached pic. I also attached a set of the installation instructions for this hitch.

It is true that the center of the rearmost bolt holes for the Curt Trailer Hitch Receiver #C14355 measure 32-11/16" on center, but since these bolt holes are oblong this trailer hitch will still fit your 1999 Ford F-250. If you note in the…

The horizontal mounting plate that mounts to the frame of your vehicle on the #41947 is 2-13/16" wide and the mounting plates themselves are 11-9/16" tall. The holes on the horizontal mounting plates are 3/4" and 1-1/4" in…

I have a Curt Class V 2-1/2 inch that fits your 2000 Ford F-350 cab and chassis with the #C15845 but the #C15810 was not designed to fit the narrower cab and chassis truck frames so it would not work for you. We've spoken with Curt in the past…

Since your 2012 Ford E-350 has a service body your best option for a hitch is with a weld-on unit like the Buyers Products Class 5 #3371801050L. This particular unit includes the necessary mounting plates and has more than enough capacity for…

Curt 2-1/2-inch Class V hitch #C15845 will fit the 1999 Ford F-450 cab and chassis so long as the frame width (measured outside to outside) is 34-inches. Drilling is required for installation. I went to our warehouse and measured the side-to-side…

The overall width of the Buyers Products Class 4 Service Body Long Hitch Receiver #3371801055 that you referenced 44-1/2 inches. I attached a picture that has that dimension and a few others listed as well.