Can Curt Pintle Hook Ball Be Locked for Standard Trailer Coupler?  

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The Curt SecureLatch Pintle Hook and Mount part #CU4759FR has a 2 inch ball, fits a 2-1/2 inch hitch and is adjustable in height. This also has a 20k capacity.

Yes, if you wanted to use the Curt Pintle Hook with 2-5/16" Ball #C45908 that you referenced in the rise position you certainly could. You'd flip the hook combo as well as the shank upside down and you'd be set.

Yes, it can! To add a 2" hitch ball to the Curt Pintle Hook with 2-5/16" Ball item #C45910-15-20 you'll need the Replacement Hitch Ball for Curt Pintle Hook Combo item #C48820. This is the only way to add a 2" hitch ball you…

Hi Michael, To replace your Suburban SW6 DE water heater you'll want the Furrion RV Tankless Water Heater #FR98SR. This tankless water heater is one of the most efficient units on the market, producing up 144 gallons of hot water per hour. The…

I recommend pairing the Curt SecureLatch Adjustable Pintle Mounting Plate #C96BR with the Curt SecureLatch Pintle Hook with 2-5/16" Ball #CU97FR so you get the most versatility out of your setup. If you don't already have a hitch pin for…

The Blue Ox Adjustable Ball Mount with Pintle Hook for 2-1/2" Hitch #BLU25XR and the Curt #C45908 are identical. According to Blue Ox and Curt they don't make the parts for each other so in theory it is not the exact same part, just the same…