Crossbars and Towers Compatible With Rhino-Rack RTC Roof Tracks on No Boundaries Trailer

Question

Question:

Hi I have a No Boundaries Travel Trailer with RTC roof tracks. What cross bars and towers are compatible with these tracks? Thank you

asked by: Nate

0

Expert Reply:

We have everything you need to complete the roof rack set up on your Forest River No Boundaries travel trailer, which according to my research has the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV148.

Like you mentioned, all you need are the towers and crossbars:

- Rhino-Rack Vortex Aero Crossbars - 71" Long # RRVA180B-2

- Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600

This will give you a complete roof rack on your No Boundaries trailer so you can carry even more gear on your journey, like the kayaks with the etrailer J-Style Kayak Carrier # e98878, a canoe with the Malone BigFoot Pro Canoe Carrier # MPG112MD, or bikes with the Thule UpRide Roof Bike Rack # TH599000.

I've added links to instructions and some video reviews for you to check out as well.

expert reply by: Kyle S

0

Answer 1

Based on my research your Forest River No Boundaries should have Rhino-Rack tracks on top, so you'd just need the feet and then the appropriate length crossbars. Just measure between the tracks to get the right length, and you'll want the…

view full answer...

Answer 2

As seen in the attached photo, the towers on the Malone AirFlow2 Roof Rack - Aero Crossbars 58" #MPG216 and 65" version #MPG217 measure 7" long. I also attached a demonstration video that shows the 58" system being used on a 2019…

view full answer...

Answer 3

The Malone SeaWing #MPG113MD will fit round, square, aero, elliptical, and most factory crossbars. So it will work with your Rhino Rack Aero Crossbars. Just make sure that the measurement from the center of the front crossbar and the center of the…

view full answer...

Answer 4

The feet and crossbars of roof racks need to stick with the same brand as they are not interchangeable. So if you were wanting to use the Malone 58 inch aero crossbars on the roof of your 2007 Toyota 4Runner you'd need to use the roof rack kit…

view full answer...

Answer 5

No, the crossbars from the Malone AirFlow2 Roof Rack #MPG217 do not fit the Rhino-Rack legs. You'll need to use the legs that come with the #MPG217.

view full answer...

Answer 6

We do have a trailer hitch receiver and all the parts you need in order to add a 7-way to your 2021 Toyota Sienna, though there isn't a plug-in 7-way, you will need to first add a 4-way and then install a 7-way. The exact parts you need for your…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 11

Hello Kevin, thanks for reaching out. Yakima does confirm the Timberline towers to fit the factory raised rails on the 2025 Honda Pilot. Sadly, they do not offer a direct fit for the LockNLoad Platform so your best option would be to go with a roof…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Crossbars and Towers Compatible With Rhino-Rack RTC Roof Tracks on No Boundaries Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching