bing tracking image
Q & A Icon

Recommended Trailer Hitch for 2011 Keystone Passport 245RB

Question:

I have a 2011 Keystone Passport 245RB, bumper pull that I want to add a hitch to so that I can pull a 12 - 18 ft trailer behind double pull. Which of your hitches will work best for this?

0

Expert Reply:

As long as your 2011 Keystone Passport 245RB has a box frame, C-channel frame, or I-beam frame that the frame members are no more than 66" apart, you can use the Curt Adjustable Width Trailer Hitch Receiver for RVs # C13704. This hitch can be bolted on to the frame with the included hardware and will provide you with a 2" receiver that will allow you to tow a trailer with.

To install a wiring harness to power the trailer lights on your Keystone Passport you can use the Curt Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 60" Wire Lead # C58044, which will connect to the tail light and turn signal circuits on your trailer and provide you with a 4 way harness for towing a trailer.

For a ball mount you can use the Draw-Tite # 2923, which uses a hitch ball with a 1" shank diameter. For a 2" trailer coupler you can use something like the # 63845 or for a 1-7/8" you can use the # 19260. I've also linked our entire selection of hitch balls with 1" shanks in case you need something different.

As I mentioned, I linked some parts, as well as some review videos of these parts for you to have a look at and search through that I do recommend checking out.

expert reply by:
0

Question:

Thank you. I measured between the I-Beams and it comes to 68.5. Will that same part still work or I need to change to the 13703?

0

Expert Reply:

Yes. Instead of the # C13704 you'll want to use the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703 to fit on your trailer with a 68" wide frame.

expert reply by:
0

Products Referenced in This Question






Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>