Can a Swivel Type Pintle Hook Be Used with 2 Hitch
Question:
Do you have an adjustable height mounting bracket this swivel pintle hook would attach to that includes a 2inch draw bar for use with a Class III hitch? Im looking at buying a military surplus trailer that has a pintle ring type hitch and want to pull with a full size SUV with a V8. I am having trouble locating a draw bar/bracket to mount this swivel pintle hook to so I can do that.
asked by: Mark H
0
Expert Reply:
The best option I have for an adjustable pintle hook that slides into a 2" hitch is the Curt Pintle Hook Mounting Plate part # C48341 with the Curt Pintle Hook part # C48210. I am not aware of any way to use a swivel type pintle hook with a 2" hitch. That said, you might be interested in Lock-N-Roll system, like part # 336TS528 and part # 336VS501 which would give you the swivel feature and 2" hitch compatibility.
expert reply by: Conner L
0
Products Referenced in This Question
Lock N Roll Articulating Channel Tongue Trailer Coupler - 2" Channel - Trailer Side
- Straight Tongue Trailer Coupler
- Off Road Coupler
- Bolt-On
- Weld-On
- 6000 lbs GTW
- 2 Inch Channel
- Latch Plates
- Lock N Roll
more information >
Lock N Roll Articulating Trailer Hitch for 2" Receivers - Vehicle Side - 11,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- Steel Shank - Matte Black
- Drop - 0 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 11000 lbs GTW
- Class IV
- Off Road Coupler
- Lock N Roll
more information >
Curt Pintle Hook - Bolt On - 20,000 lbs
- Pintle Hitch
- Pintle Hook - Standard
- 20000 lbs GTW
- Bumper Mount
- Plate Mount
- No Shank
- CURT
more information >
Product Page this Question was Asked From
Curt Pintle Hook Mounting Plate for 2" Hitches - 10" Shank - 14 Hole - 10,000 lbs
- Pintle Hitch
- Pintle Mounting Plate
- 10000 lbs GTW
- 2 Inch Hitch Mount
- 14 Holes
- Standard Shank
- CURT
more information >
Similar Expert Q&A Pages
- Mounting Plate Available For a Pintle Hook Which Can Be Used In The Rise Position
- Distance From Hitch Pin Hole To Brace On the Curt Pintle Hook Mounting Plate C48341
- 2 Pintle Hook Mounting Plate and Curt Pintle Hook w/ 2 Ball Capacity
- Short Shank Pintle Mount that has the Most Rise and Drop Adjustments
- 10" and 12" Mounting Plates For the Curt Pintle Hook with 1-7/8" Hitch Ball # C48180
- Does Curt Pintle Hook # C48200 Fit Curt Pintle Mounting Plate # C48341