Question:
HI I have a ranger boat with a welded on plate and the jack is bad. The mounting bolts hole are 3inches apart height x 5.5inches apart length that is center of hole to center of hole. DO you have any thing that would have the same size bolt pattern ?
asked by: Randy O
Expert Reply:
For your welded plate, the Replacement Bolt-On Mounting Kit for Fulton XP Series Jack # F500349 sounds like what you are describing but it isn't a welded plate. If that is similar to what you have, then I recommend the Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FXP10W0301.
The center bolt is the style that many jacks will work with. If you have this, then this will be a good fit. If that isn't what you have then the snap ring jack like the Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FTJ120W0301 is the other alternative weld on bracket option.
Replacement Bolt-On Mounting Kit for Fulton XP Series Jacks
Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs
Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs
Video/Article/FAQ this Question was Asked From
Article or Video
