Strongarm with Lippert Ground Control 2.0 Installing on Vehicle with Sealed Underbody
Question:
I bought this kit in 2017 and installed the four arms on the front jacks at that time. Now I want to install the two arms on the back. My Prime Time Crusader 322RES has an insulated i-beam frame. Is it best to connect the arms from the electric jacks towards the back of the trailer to the i-beam frame or across the trailer to an angle iron cross member which I would have to fabricate and install?
asked by: Dennis E
0
Expert Reply:
As long as they attach to a secure portion of the trailer frame or a crossmember that then attaches to the trailer frame the JT's Strongarm kit part # LC191023 will work fine. I'd recommend going with whichever is easiest or makes the most sense for your application.
expert reply by: Jameson C
0
Product Page this Question was Asked From
JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs w/ 58" or More Between Landing Gear
- Camper Jacks
- Fifth Wheel Camper
- Stabilizer Jacks
- Steel
- 6 Jacks
- Lippert
more information >
Featured Help Information
Instructions
Miscellaneous Media
Similar Expert Q&A Pages
- Landing Gear Stabilizer Recommendations for 2020 Sabre Fifth Wheel 36BHQ
- Does JT Strong Arm Kit # LC191023 Come with Brackets to Attach to Front Landing Gear
- JT’s Strong Arm Replacement T-Handle
- Length of Tubes when Extended for JT's Strong Arm Jack Stabilizer Kit # LC191023
- Will JT's Strong Arm Jack Stabilizer Kit work with Hydraulic Stabilizer Jacks
- Will JT's Strong Arm Jack Stabilizer Kit Support 6,500 lb Rated Landing Gear
- Can JT's Strong Arm Jack Stabilizer Kit be Used on Round Hydraulic Landing Gear Jacks
- Extended and Retracted Dimensions of JT's StrongArm Jack Kit # LC191023
- JT's Strong Arm Stabilizer Replacement Outer Stabilizer and T-Handle
- JTs Strong Arm Jack Stabilizers for 5th Wheel Over Or Under 58 between landing Gear
- Troubleshooting of JT's Strongarm Adapter that's too Wide to Install
- Do JT's Strong Arm Jack Stabilizer Kit Release For Landing Gear Pads Need to be on Side
- Attaching JT's Strongarm Stabilizers to 2019 Grand Design Momentum Toy Hauler with Levelup
- Recommended Replacement Venture Landing Gear Motor and Gearbox for 2008 Forest River Sandpiper
- How to Pick Out JTs Strong Arm Jack Stabilizers for a Trailer
- Product Comparison Of MORryder Scissor Jack Cross Brace And JTs Strong Arm Jack Stabilizer Kit
- How to Install the Lippert Components JT's Strong Arm Jack Stabilizer Kit # LC191023 on RV
- Recommended Best Stabilizer System for 2018 Grand Design Reflection 28BH
- Installing JT Strongarm Stabilizer on a 16 Grand Design Reflections 337RLS 5th Wheel w/4 pt Leveling
- Making Modifications to Lippert 6.0 Leveling System on 2017 Cedar Creek Champagne 38EL
- Replacement Parts for JTs Strong Arm Jack Stabilizer
- Can JTs Strong Arm be Used on a Fifth Wheel Trailer that has Lippert Level Up System
- JT's Strong Arm Jack Stabilizer 91023 for 2018 Grand Design Reflection
- Using JT's Strong Arm Jack Stabilizer Kit With Round Self-Leveling Jacks
- How to Use JTs Strongarm Jacks with Lippert Electric Stabilizer Jacks
- Recommended Stabilization for Round Hydraulic Jacks
- Where Do The Shorter Arms for the JT's Strong Arm Jack Stabilizer Kit Mount