Are Sway Bracket Jackets Compatible with Husky Weight Distribution Systems?

Question

Question:

I have a huskey weight distribution hitch does the sway jacket bracket fit

asked by: Ron

0

Expert Reply:

The Sway Bracket Jackets for Equal-i-zer Weight Distribution Systems - Qty 2 # EQ95-01-5150 are designed for 2 inch wide brackets and square bars so they are not a fit for your Husky brackets. They will only fit the Equalizer brackets # EQ95-01-5600.

expert reply by: Jason S

0

James

7/12/2024

Do you know of any company making them for Centerline?

Reply

Answer 1

Basically, one friction-style sway control can be used for trailers with up to 6,000-lb GTW. If your trailer's GTW is between 6,000 lbs and 10,000 lbs, you will need two sway-control units, one on each side of the trailer. You will also want to…

view full answer...

Answer 2

The Forest River Cherokee Wolf Pup has aluminum wheels so you'll need to use the long acorn style wheel lug nuts. I have some great options for this but I highly recommend the one-piece style so you don't have to worry about them bulging out…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Great question, Kevin. The Onboard Scale system on your 2024 Ford F-350 Super Duty works by essentially measuring how low the bed is sitting and it gives an estimated weight based off of that. If you added a suspension enhancement then that would…

view full answer...

Answer 8

Justin, so it does look like you're going to need the Roadmaster Sterling or Nighthawk Tow Bar Adapter Brackets for Demco Classic Base Plates #DM9523062 to use the Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights #RM-676 with your Demco…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

You are not missing anything and you are correct. The Reese Weight Distribution Shank #RP69FR will provide 8.75" of drop. I have included a picture that shows the drop dimensions between each hole.

view full answer...

Are Sway Bracket Jackets Compatible with Husky Weight Distribution Systems?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching