Don't Miss These Holiday Savings!
Question:
Hello, I bought a Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2inch in May of 2017 for my Acura MDX, 2017. We now need a 7 pin Connector Harness and a Lock Nfoot Roll articulative trailer hitch vehicle side to pull our tear trailer 1800# dry weight. What would you recommend? Thank you!
asked by: Leah Q
Expert Reply:
For a Lock N Roll articulating trailer hitch for the vehicle side that fits a 2 inch hitch you'd want the part # 336VS501 to match your trailer and then for wiring you'd want the # 118628 for an easy to install and very reliable setup.
Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way.
If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller.
For a brake controller I would recommend the # TK63VR. This is our best selling brake controller because of how well it works and how easy it is to setup.
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Adapter 4-Pole to 7-Pole and 4-Pole
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
Tekonsha BRAKE-EVN Trailer Brake Controller - 1 to 4 Axles - Proportional
Lock N Roll Articulating Trailer Hitch for 2" Receivers - Vehicle Side - 11,000 lbs
