How to Secure Loose Fit for Trailer Hitch Adapter  

I have two ball mounts with removable stainless steel balls that have the same rise and drop. The hitch ball sizes are 2-inch and 2-5/16-inch. They are the Diversi-Tech Ball Mounts, part #DTALBM6600-2S, and the newer Solid Tow design in the…

It sounds as if you have a Diversi-Tech or Fastway adjustable ball mount like part #DTALBM6600. I spoke with the manufacturer, who recommends that you use air tool oil to lubricate the lock and the pins that lock the ball mount into the hitch…

The two ball mounts that you referenced are basically the exact same ball mount with the exception that the #DTALBM6800 can do an 8 inch drop and a 9 inch rise and the #DTALBM6600 can do a 6 inch drop and a 7 inch rise. I would think you would be…

You will need the Repair Kit #RM910003-85 for your Roadmaster Falcon All Terrain, Non-Binding Tow Bar #RM-522. You should not have any need to replace the Inner Arm #910021-65 or Latches #910003-45 unless there is very noticeable wear on these…

If the spare tire of your Jeep Wrangler Unlimited isn't a super wide off-road tire size there's a good chance the Yakima OnRamp part #Y36FR will fit past it without clearance issue as it has 9 inches from the center of it's hitch pin out…

The Curt Pin and Clip #F-4 that you referenced is designed to work on 1-1/4 inch hitches. The reason your hitch has a 1/2 inch hole and a 5/8 inch hole is because it is setup for an obsolete anti-rattle device Draw Tite J-Pin. We no longer carry the…

The 2-1/2 inch Reese shank #RP54977 will fit the 2-1/2 inch factory Ford hitch on your truck. But there could be a possible fit issue. The factory Ford 2-1/2 inch receiver has a unique corner radius that doesn't match up to anything well. We know…

The Super Titan Forged Pintle Hook Plate #RP38186 that you referenced is designed to fit 3 inch Draw-Tite Super Titan hitches.

I have a couple different options on ways to fix a loose ball mount. The Anti-Rattle Hitch Pin, #SHP2061, dramatically reduces any movement or vibration between your hitch and hollow shank ball mount. The No-Rattle Trailer Hitch Wedge, #MPG908, will…

I have a great solution for you. I confirmed with Curt that they do not have a tongue weight rating for the Curt High-Low Adapter for Tow Bars - 2" Hitches - 4" Rise/Drop - 8" Long #C59KR because this adapter is recommended to use for…

The Pintle Hook #C48215 that you referenced does include mounting hardware to attach to a pintle hook plate like the Super Titan Forged Pintle Hook Plate #RP38186 that you referenced. I also pulled these two parts and was able to determine that they…

We have a really nice selection of aftermarket trailer hitches available that are confirmed to fit your 2019 Honda Odyssey. The biggest difference between an OEM hitch and most aftermarket units is that a factory hitch will typically be a bit more…