What is the MIL Thickness of the RhinoEXTREME RV Sewer Hose  

You are correct in that connecting a trailer battery to the 12 volt port on a 7 Way plug will not charge it and will only maintain the charge on said battery. Odds are the people that are actually charging their batteries do either have the Redarc…

You would not be able to charge your battery through the wiring on your 4-way trailer connector. Since your truck has a 7-way connector, you could maintain the power to the battery but not charge it. To begin, you would need to cut off your 4-way…

The RhinoEXTREME RV Sewer Hose w/ Swivel Fittings #CAM39861 referenced in your question is essentially an upgraded version of the RhinoFLEX hoses, such as #CAM39761. The primary difference is that the RhinoEXTREME features a thicker sidewall that…

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

Hey Tim, Good questions, and camper tie-downs are always a touch confusing so I can explain the difference for you between the two TorkLift camper tie-downs for your 2016 Ford F-250 long bed with factory hitch and no running boards. The difference…

The 15,000 Btu Furrion Chill HE AC like the part #FR23PV does indeed have a start capacitor. In regard to the starting power needed, I reached out to Furrion, who told me the 15,000 Btu Chill AC's require 30 amps and 2,500 starting watts. So that…

For a Dexter 3,500 lb trailer axle hub the correct replacement wheel stud is the part #7-122.

I reached out to my contact at Dexter and for a replacement stud compatible with the Dexter Trailer Hub #K08-426-91 you have you will need the #7-122. This will be slightly longer than your current studs but all of the other dimensions are the same.…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

Hey Chynna, the Lippert Tread Lite steps part #LC353543 that you referenced is a complete step kit. It includes the motor, gear box, control module etc. Basically it comes with everything needed to complete the install.

When it comes to choosing between the Curt TruTrack Weight Distribution System w/ Sway Control #C17499 and the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control #EQ37100ET you'll want to take a couple of things into consideration: 1.…

To fit the hose in the bumper you will have to take the orange collars off the ends of the RhinoFLEX hose. There should be side storage on your trailer that you can store these and other items in allow the hose by itself to fit as intended. This is…