Advent Air RV AC Units that Can Fit In Place of Coleman AC Units  

The Advent Air RV Air Conditioner #ACM150B you purchased will replace your current Dometic Air Conditioner with no additional components needed. The Coleman Mach Adapter Wiring Kit for Advent Air RV Air Conditioners #ACCOLKIT is only needed if…

It sounds like you're looking for a replacement for your Coleman Mach AC unit. Since you have a Coleman setup I recommend the Advent Air Replacement RV Air Conditioner for Coleman Setup w/ Start Capacitor - 13,500 Btu - White #ACCOL135. This AC…

Hi Charlie; For an AC unit that you can easily swap out with your Coleman-Mach ducted setup I recommend the Furrion Chill HE Replacement RV Air Conditioner #FR42PV. This comes with a wiring harness that lets you plug directly into your Coleman setup…

The RR error code on your Lippert Ground Control #LC358590 is one of the errors listed in the manual, and it states to check harness connections at controller and at jack, check harness for damage and repair or replace as necessary. Normally to clear…

Yes, going from a 4 leaf to a 6 leaf spring would add slightly to your ride height. For example, if the current 4 leaf spring has 3/8" thick leaves, and you go to a 6 leaf spring with 3/8" thick leaves, you would be adding 3/4" of…

I recommend the Roadmaster Front Anti-Sway Bar #RM-1139-148 for the front of your 2011 Tiffin Allegro on the Ford F-53 22,000lb chassis. This will replace your current way bar with a thicker and stronger 1-3/4" sway bar and uses polyurethane…

All of the upgrades you mentioned would work great together and would give you the best ride possible. The biggest difference will be noticed with the upgrade of the rear sway bar, then the front, then the SumoSprings. For a rear sway bar you'd…

Adding the steering stabilizer and the front sway bar is definitely the first couple of steps that you want to take to help stabilize your motorhome. If you haven't already picked one out I recommend going with the Roadmaster #RM-1139-148 which…

It sounds like you have the Lippert Ground Control Auto Leveling Landing Gear 3.0 part #LC358590 and are looking for replacement rear landing gear legs. For that you would want the part #LC344792 for the rear right leg and the #LC305339 for the rear…

I did some checking and it looks like your 2003 Honda CR-V AWD is flat towable as-is as long as you keep it under 65 mph. For a base plate kit you'll want the part #1541-1 for if you do not have the brush guard or part #1541-3 for if you do have…