Does 3,500 lb Trailer Hub Drum Have Hole for Adjusting Brake Assembly Tightness
Question:
I need two 10x2-1/4 hydraulic brake drums for my boat with bolt pattern 5 on 4.5. The problem is all your pictures of drums do not show the hole in the face of the drum so you can adjust the hydraulic brakes.
asked by: Ryan N
0
Expert Reply:
The reason there isn't a hole in the drums for adjusting brake assemblies is because the hole that was designed for that is actually on the brake assembly backing plate. So a hub/drum like the part # AKHD-545-35-EZ-K would be all that you'd need as this is the right size, capacity, and has the correct 5 on 4-1/2 inch bolt pattern.
expert reply by: Jameson C
0
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Recommended Replacement Hub/Drum and Brake Assembly for Typical Dexter 3500 lb Axle
- Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Replacement Hub for AxleTek Hub # BD2-545-17
- How to Determine Trailer Axle Capacity to Find Parts to Add Brakes to Trailer
- Replacement Brake Drums and Brake Assembly Parts for Lance 1685 Travel Trailer
- Recommended 5 on 4-1/2 Hub for 3,500 lbs Axles w/ L68149 Inner Bearing and L44649 Outer Bearing
- Replacement Bearings/Seals for Haulmark Model TH85X20WT2 Tandem Axle Enclosed Cargo Trailer
- Pre-Greased Hub/Drum for 3500 lb Spindles on 2018 R Pod 178 and Four Winns D0210S02 Trailer
- Pre-Greased Trailer Hub & Drum That Fits Lippert 3,500 lb Axle
- Recommended Hitch for 2011 Nissan Juke for Towing 2,000 Pound Trailer With Brakes
- Replacement Hub and Drum Assembly for Tru-Ryde RVD-H-545
- Inner Grease Seal Placement On Trailer Electric Brakes
- Replacement Double Lip Grease Seal for Kodiak Disc Brake Kit # K2HR35DKG
- How To Find Correct Replacement Bearings and Hub for Magic Tilt Chaparral
- Best Way to Pack Trailer Bearings with EZ Lube Spindles
- Determining Which Replacement Parts Fit Lippert 8000lb Axle
- Replacement Hub/Drum Assembly and Brake Assembly for 2017 Rockwood Mini Lite Travel Trailer
- Determining the Correct Replacement Brake Drums and Hubs for 1967 Forester Camper
- Do Trailer Hub Seals Get Damaged When Pulling Hub Off to Inspect Brake Assemblies
- Replacement Hubs and Bearings for Hyde Drift Boat Trailer With Dexter Axle
- Replacing Lippert 3,500 Pound Axle with 76 Inch Spring Seat Length
- How to Determine What Replacement Hub and Drum Assembly with a 5 on 4-1/2 Bolt Pattern
- Can EZ-Lube Hub and Drums be Used on Non-EZ-Lube Spindles
- Correct Replacement Hub/Drum for 1994 Haulmark Elite 24' Trailer
- Comparing the E-Z Lube Hubs to the Standard Hub Assemblies for Trailer Axles
- Easiest Place to Measure 5 Lug Trailer Hub to Determine Bolt Pattern
- Can a Hub/Drum Be Installed on Axle Without Electric Brake Assembly
- Troubleshooting Weak Brakes on 2017 Forest River/Surveyor Model 251RKS Trailer
- How to Add Electric Drum Brakes to a Trailer
- Parts Needed to Add Brakes to a 3,500 lb Dexter Trailer Axle