Replacement Water Lines and Fresh Water Inlet for Pop Up Camper

Question

Question:

News to us 10 YO Viking pop up model 2107LS and water line is leaking where the galley has been moved up and down so often To replace that hose, going from outside to the sink, and to the water tank pump what do i need to buy? Hose clamps are not the ones I know, and wonder if the fittings are not the same as a house.... Cant try the pump, to see if that is working, untill I fix this leak. HELP, please.. May even want to replace the entry fitting outside that you hook the fresh water hose to? Can you give me good advice and sell me what I need? Thank you very much. Unhappy Harry :-

asked by: Harry S

1

Helpful Expert Reply:

We do have water inlet fittings, like the Valterra Water Inlet for RVs # A01-0176LFVP, that would replace the entry fitting on the outside of your pop up camper if you decide to replace that fitting.

To replace the water lines inside/under your camper, typically PEX pipes and fittings are used to make those connections. We do not have these available for purchase, but they are usually available at your local hardware store.

expert reply by: Victoria B

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

According to my research you have a damaged water valve that could have become brittle if you left the Dometic 320 toilet out in the cold winter temps. To fix this you need to replace the water valve with part #DOM93FR.

view full answer...

Answer 3

I pulled up a Coleman RV AC unit 7330-714 and it is a Mach style unit like what the part #MA00-325001 you referenced is designed to fit so this would be the correct replacement.

view full answer...

Answer 4

An electric A-frame tongue jack like #EJ-3527-BBX or #3370093500 that has a pre-wired 7-way plug will rely on the ground and +12V contacts within that plug to deliver operating power. Jacks may not function with less than 12 volts. Those contacts are…

view full answer...

Answer 5

I recommend going with the Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - 10,000 lbs GTW, 1,000 lbs TW #BLU66FR to pull your Grand Design Imagine 2670MK RV. This is a very impressive weight distribution system that is much quieter…

view full answer...

Answer 6

Since your 2017 Grand Design Imagine 2500RL Travel Trailer has a GVWR of 6,995lbs the Lippert Electric Ground Control TT Automatic 5-Point Leveling System #LC672136 will fit perfectly. This system is designed for trailers with a GVWR of up to…

view full answer...

Answer 7

MPT stands for Male Pipe Thread and FPT stands for Female Pipe Thread, which is just an indicator for how the components can connect to other components. For example, the RV City Water Inlet with Brass Check Valve - FPT #37262155 you were looking at…

view full answer...

Answer 8

To select the correct B&W Continuum Weight Distribution System for your needs you will first need to determine if you have a standard coupler(mounts on top of trailer frame rails) or an underslung coupler(mounts on the bottom of the trailer frame…

view full answer...

Replacement Water Lines and Fresh Water Inlet for Pop Up Camper

Product Page this Question was Asked From

Continue Researching