UFP Hubs Spare for Trailer that Uses Bearing Numbers L44649 L68149
Question:
I don't think that's completely right. Everything looks correct except the grease seal. The National 473317 grease seal that my hub uses has an ID of 1.688", the kit you showed me has a seal ID of 1.719".
asked by: Chad M
0
Expert Reply:
The CE Smith hub part # CE13511 is exactly the hub you need as a spare. It matches the bearings and grease seal inner diameter so it would fit and work great. It also comes pre-greased.
expert reply by:
Jameson C
0
Products Referenced in This Question
Double Lip Seal for 3,700-lb Marine Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.687 Inch I.D.
- 2.561 Inch O.D.
- Dexter
more information >
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- CE Smith
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Hub for DICO 45264
- Q&A: Replacement Idler Hub For Old Boat Trailer With DICO 45264 Idler Hubs
- Article: How to Measure the Bolt Pattern of a Trailer Wheel
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Determine Trailer Axle Capacity
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Hub Replacement Recommendation for DICO Hub part 45264
- Q&A: How to Know if the Hub part # 84545UC1-EZ Will fit an Axle Spindle
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: How to Find Correct Replacement Hubs for Shorelandr Boat Trailer
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Measuring a Trailer Tire
Chad M.
7/3/2020
I don't think that's completely right. Everything looks correct except the grease seal. The National 473317 grease seal that my hub uses has an ID of 1.688", the kit you showed me has a seal ID of 1.719".