Correct Cover for the 2,000-Watt Portable RV Inverter Generator

Question

Question:

eTrailer Generator cover #333-0010 info says that it fits the Generator #333-0001. Cover info says it fits generator size: 18 -7/8inch Long, 15-3/8inch H, 11-3/4inch W. The generator #333-0001 dimensions are 20inch L, 16-3/4inch H, 12-1/8inch W. This indicates that the cover is too small for the generator. Can you please confirm. Thanks.

asked by: Charles R

0

Expert Reply:

I checked with the manufacturer and can confirm the Storage Cover for etrailer 2,000-Watt Inverter Generator part # 333-0010 fits the 2,000-Watt Portable RV Inverter Generator part 333-0001. It was designed for this exact generator so there will be no issues but I do see the confusion.

expert reply by: Conner L

0

Answer 1

For your MaxxAir 4951KS the correct replacement lid is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K (smoke) or part #MA10A40002K (white). The shape of the lid is slightly less rounded as your current lid but it will…

view full answer...

Answer 2

The model number for fans such as the MaxxAir MaxxFan Mini Roof Vent, #MA00-04401M is listed on the upper side of the assembly itself. Please see the attached image. You will best identify this by opening the vent and climbing on top of the RV.…

view full answer...

Answer 3

Hey Lynn, we generally don't recommend running more than one set of suspension enhancement on a vehicle because the performance of the two kits together has never been tested and most likely if you need two you are overloading things. I would…

view full answer...

Answer 4

Hey Jan, to locate the Torklift Generator carrier part #TLA7752 off-center in front of only one of the doors would require finding a welder/fabricator in your area who could add an additional hitch opening off to the side. This is such a rare request…

view full answer...

Answer 5

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 6

Between the 1,400 lb SumoSprings Solo Custom Helper Springs #SS68DR and the 1,800 lb Kit #SS78DR I recommend going with the 1,800 lb kit. These won't affect your daily drive but will offer the support you need when you are going Overlanding. If…

view full answer...

Answer 7

The Stromberg Carlson Trailer Tray Cargo Carrier for A-Frame Trailers, #CC-255 has about a 29" clearance from the top of the trailer frame at its mount point to the cargo tray. A 30 lb. propane tank measures approximately 24" in height so…

view full answer...

Correct Cover for the 2,000-Watt Portable RV Inverter Generator

Product Page this Question was Asked From

Continue Researching