Locking Hitch Pin for Swagman S64671 XTC2 TILT 2 Bike Rack

Question

Question:

Is there a lock available for S64671 bike rack?

asked by: Terry

0

Expert Reply:

There sure is! For a locking anti-rattle hitch pin/cable lock combo, use # S64031 or for the hitch pin only, use # S64029. I've linked to product description videos for each part.

expert reply by: Mike L

0

Answer 1

You can replace the threaded pin and clip for your Swagman XTC2 TILT Bike Rack for 2 Bikes #S64671 with part #P5902 or you can upgrade to the Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks #S64029 to ensure that no one can take of…

view full answer...

Answer 2

Yes, you are on the mark with the correct hitch and cable lock for the Swagman XTC-2 TILT 2-Bike Rack #S64671. - Anti-Rattle Hitch Lock and Cable #S64031 This is exactly what you need to lock the XTC-2 TILT to your Subaru Forester as well as lock…

view full answer...

Answer 3

I can help you out with the correct lock for the Swagman XTC-2 TILT 2-Bike Platform Rack #S64671. Since this bike rack is a fit for both 1-1/4" and 2" trailer hitch receivers, the correct lock is the Locking Anti-Rattle, Threaded Hitch Pin…

view full answer...

Answer 4

The Swagman Anti-Rattle Hitch and Cable Lock, part #S64031 will indeed replace the hitch pin that's included with the bike. You will need a wrench to install/remove the rack, but it's not really a big deal. I went to the local discount…

view full answer...

Answer 5

The Anti-Rattle Hitch Lock and Cable for Swagman Bike Racks w/ 2" Shanks - 8-1/2' Long #S64030 works with Swagman bikes with a 2" shank. The Swagman XTC2 TILT Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount #S64671…

view full answer...

Answer 6

Both the Swagman XTC-2, #S64670, and the Hollywood Racks Trail Rider, #HR200Z, are hitch-mounted, platform-style bike racks which are able to transport a pair of bikes. Each can fit 1-1/4- and 2-inch hitches with straps that hold the wheels in place…

view full answer...

Answer 7

Many of the platform style bike racks are similar. In terms of overall quality and performance, the Swagman XTC2, #S64670, is my top choice when compared to the Hollywood Racks Sport Rider, #HR1000Z. Apart from the same basic design these two racks…

view full answer...

Answer 8

When it comes to construction and the powder coat, both the Hollywood Racks SportRider SE2 #HR1000Z and the Swagman Chinook #S64683 are both made of steel and will come with a heavy powder coating on them to help fight off corrosion. Additionally,…

view full answer...

Answer 9

If a bike has fenders, you'll want to go with a frame mount style rack. The Hollywood Racks Sport Rider SE Bike Rack part #HLY84FR is an excellent option for this and what I recommend using. It can carry bikes up to 50 lbs and it only weighs 37…

view full answer...

Answer 10

The Kuat Transfer V2 #KU84FR is an excellent choice in a bike rack and will fit great with the Curt Trailer Hitch #C13513 on your 2006 Kia Sorento. The Transfer series has been a favorite of mine for a while now because it's ease of use and the…

view full answer...

Answer 11

I have a solution for you, but you're not going to be able to use the Thule Helium #TH44VR on a bike with a rear basket/rack like that installed; you won't be able to use a wheel mounting rack on bikes with fenders or rear racks/baskets…

view full answer...

Answer 12

The center mast on the Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches - Frame Mount Item #S64650 folds down and flat with the base of the rack. With the bikes removed the rack should still sit below the top of the bumper, which…

view full answer...

Locking Hitch Pin for Swagman S64671 XTC2 TILT 2 Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching