D Washer for 3,500 lb Hub Assembly Item # 84545BX
Question:
I am in need of a Dfoot Spindle Nut Washer to fit a 3,500# axle. I am replacing the hub/drums and idler hubs on my dual axle utility trailer. I have purchased a complete assembly from etrailer.com but I overlooked ordering a spindle washer. When I removed the hubs from my trailer I discovered one wheel was missing its spindle nut washer. The other 3 hubs were found with a Dfoot washer. My question for you is, Will Dfoot Washer for EZ Lube Spindles Item # 5-23 fit my spindle that utilizes Hub Assembly #84545BX? If not, what is the part number I need?
asked by: Paul M
Helpful Expert Reply:
A 3500 lb axle typically has a 1 inch diameter threaded portion. The # 5-23 would be the correct D washer for your application.
Products Referenced in This Question
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Similar Expert Q&A Pages
- Availability Of Pre-Greased and Assembled 3500lb Idler Hub with 5 on 4-1/2 Bolt Pattern
- Replacement Dexter 8-248 Hub, Races, Bearings and Grease Seals For Boat Trailer
- Replacement Dexter Idler Trailer Hub With 8-248 and T20 Stamped on Back Of Hub
- Bearings Included with Dexter Hub 84545BX
- Replacement Bearing Kit for Dexter Axle 8-248 Idler Hub
- How to Choose Correct Idler Hub Replacement for Dexter Axle 8-256 Hub
- Availability Of Galvanized Idler Hubs To Replace Dexter 8-248 Idler Hubs
- Trailer Hub/Drum and Brake Assemblies to Fit in Place of Dexter 3,500 lb Axle Idler Hub
- What is the Inner Diameter of the Grease Seal that Comes with Trailer Hub # 84545BX
- Will Dexter 8-248 Dexter Hub Replace Reliable R1001 Hub
- After Installing New Hubs Do You Have to Break Them In
- How to Select the Correct Hub for Trailer
- Finding Replacement Hubs for Older Trailer
- Bearings and Drum Size for 84 and 42 Spindle
- How to Pick Out a Replacement Hub for a Trailer
- Replacement Axle for Lippert 5200 that is 86.5 inches Long
- Origin And Stud Dimensions Of Dexter # 84545BX Trailer Hub
- Trailer Hubs that Will Fit Dexter 3,500 lb Axle
- Do the Races Come Pre-Installed on Trailer Hub Assembly, # 84545BX
- Replacement Bearings for Dexter Idler Hub Assembly for 3500 lb Axles # 84545BX
- Idler Hub Needed for 3500 lb Axle
- Replacement Hub for Utility Trailer with Dexter 8-256 Hub
- Could the Hub Drum part # 84545BX fit a Mobile Home Axle
- Can 3,500 Lb Hub be Used to Replace 2,000 Lb Hub with Same Size Bearings
- Hub Recommendation to Replace Dexter Hub Marked 8-248
- How to Pick Out Replacement Hub for 2003 Four Winds Boat Trailer
- Replacement Dexter 8-248 Hub Recommendation