Parts Needed To Install Tekonsha Prodigy P2 Trailer Brake Controller On 2020 Jeep Wrangler Unlimited

Question

Question:

jeep wrangler unlimeted jl cb connecter and brake controler p2

asked by: Howard K

1

Helpful Expert Reply:

In order to install the Tekonsha Prodigy P2 Trailer Brake Controller part # 90885 on a 2020 Jeep Wrangler Unlimited you will need to use the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers part # 3073-P.

expert reply by: Conner L

1

Answer 1

If the 2018 Jeep JL Wrangler has a factory tow package you can just use a Tekonsha Brake Controller p3 part #90195 with a brake controller harness part #3073-P to install a brake controller in the Jeep. The harness will plug into a port under the…

view full answer...

Answer 2

For your 2021 Jeep Wrangler 4xe I recommend the Tekonsha Prodigy P3 Trailer Brake Controller #90195. This brake controller will give you proportional braking which automatically adjust braking force to your Flagstaff based on how hard or light the…

view full answer...

Answer 3

That is correct. If your 2021 Wrangler Unlimited has the connector located under the dash to the left of the steering column near the top of the e-brake pedal as shown in the provided photo, you'd use the #3073-P harness to connect the #90195…

view full answer...

Answer 4

I'd be happy to help you with that. You'll first want to choose a brake controller. I'd recommend the Redarc Tow-Pro Liberty, part #RED24FR. You'll also need the #RED69FR wiring pigtail. The Tow-Pro Liberty is a remote mount…

view full answer...

Answer 5

In order to use the Redarc Tow-Pro #RED44FR on your 2021 Jeep Gladiator (with factory tow package), you will need the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Jeep #3073-P. With this wiring harness, you will be able to install…

view full answer...

Answer 6

Actually, since your Wrangler Unlimited is equipped with the factory tow package, it will have the brake controller connector under the dash. The install is something you'll be able to complete yourself with ease as it's a plug and play…

view full answer...

Answer 7

We do offer the correct harness that will allow you to install the Redarc Tow-Pro Liberty part #RED24FR or Redarc Tow-Pro Elite part #RED44FR on your 2023 Jeep Wrangler, it's the Plug-and-Play Wiring Harness for Redarc Tow-Pro Elite or Liberty…

view full answer...

Answer 8

Correct, the Redarc Tow-Pro Liberty Brake Controller #RED24FR will indeed still continue to calibrate without a trailer connected, but without the constant LED light. Per Redarc, if you just drive normally - even without a trailer connected - the…

view full answer...

Answer 9

Good question, and a trailer does need to be connected in order for the LEDs to be on when using the Redarc Tow-Pro Liberty Brake Controller #RED24FR. If a trailer is not connected and you press the manual override of the Liberty #RED24FR, the LED…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Parts Needed To Install Tekonsha Prodigy P2 Trailer Brake Controller On 2020 Jeep Wrangler Unlimited

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching