HappiJac Swing Out Bracket for my Dually.  

The Swing Out Extension Brackets #LC182496 are designed for use with the HappiJac Truck Camper Jack Systems #LC736514-4, #LC736514-ELKIT, #LC736515-4, and #LC736515-ELKIT. If you have one of these kits on your 2006 Lance 951, then you can definitely…

The Swing Out Extension Brackets for HappiJac Truck Camper Jacks - Qty 2 #LC182496 will have 3.5 inches up to 4.5 inches depending on your camper brackets. This will be per side. Based on your photos it looks like you'll get about 3.5 inches per…

With dually trucks I recommend the Swing Out Extension Brackets #LC182496 with the HappiJac Manual Truck Camper Jack System #LC736515-4. This is due to the Brophy Heavy Duty Cable Camper Jacks #CX74 having to sit under the lip of the camper. Since…

From the pivot bolt to the jack bracket on the Swing Out #LC182496 there is a distance of just about 4-1/2".

The distance between bolts on the HappiJac #LC182496 Jack System, measured center-on-center is 7-1/4" inches and 17" overall length. I have attached a drawing with measurements.

The Swing Out Extension Brackets part #LC182496 which are for HappiJac Truck Camper Jacks will add approximately 3-1/2" - 4-1/2" of clearance to the existing jacks per side. This can then be used to determine compatibility. I would…

Thanks for the picture! I would be happy to help you Yes, you are correct in assuming you will only need one set of the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems Item #LC182496. These come in pairs and you will not need them…

The only application we offer swing out brackets for are HappiJac truck camper jack systems like part #LC736515-ELKIT. If this is what you have then you can use Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems part #LC182496 to…

I recommend using the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems item #LC182496 and the HappiJac Fixed Extender Bracket for Dual Wheel Chassis Truck Camper Jacks item #HJ54FR. The fixed extenders are only 5" wide apiece.…

The length of the HappiJack Swing-Out Extender Bracket #HJ54FR is 16 inches, the width is 5 inches, and the distance between the mounting holes is 7-1/2 inches. I went ahead and attached a diagram of the dimensions to this question as well as a video…

Truck campers are certainly a cool, niche way to go rv'ing, and I can understand why you'd want some additional clearance getting past that wheel well on your dually Ford F-350 to make the experience even more enjoyable. The #LC182496 hinge…

From the pivot bolt to the jack bracket on the Swing Out #LC182496 there is a distance of just about 4-1/2"