Will Replacement Furrion Monitor Power Cable Work with the Older Furrion Digital Camera System

Question

Question:

Does this power cable work for Furrion FOS48TAPK-BL

asked by: Jeff N

1

Helpful Expert Reply:

Yes, the Replacement Furrion Monitor Power Cable # C-FOS07TAPK-006 will work with the older Furrion Digital Camera System FOS48TAPK-BL that you referenced.

expert reply by: Jon G

1

Answer 1

There are adapters on the market that can go from a cigarette lighter style plug that the #C-FOS07TAPK-006 has to USB/USB-C ports but we don't currently offer any so the only solution I can provide is the #RM-9332. This is a replacement outlet…

view full answer...

Answer 2

Hey Tom so I definitely know what you are asking for but due to the very minimalistic design of the Kuat Transfer part #KU84FR there isn't a great way to add lights to it. But the good news is that you most likely don't need additional…

view full answer...

Answer 3

The Rampage SuperBrite LED Tailgate Light Bar #RA960134 will install using automotive grade adhesive tape and will plug directly into a 4 way trailer connector. If you don't already have that 4 way connection, I recommend the Curt Vehicle Wiring…

view full answer...

Answer 4

I went out to the warehouse and measured the ball size of the Replacement Suction Cup Mount for Furrion Vision S Wireless RV Backup Camera or Observation System part #FR79SR for the 5" and 7" screens and it measures .85".

view full answer...

Answer 5

When measuring the slide out you'll want to measure from outside edge to outside edge of the flanges to get the correct measurement. A lot of times slide outs are close to awnings or doors so you have to account for the overhang of the arms when…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

It appears you are going to have to replace your MaxxFan 4700CN as those parts appear to be obsolete. I recommend upgrading to the MaxxFan Deluxe Roof Vent #MA00-07500K. I prefer this vent as it has a built in rain shield so you can still run the fan…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Will Replacement Furrion Monitor Power Cable Work with the Older Furrion Digital Camera System

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching