Distance Between Pivot Bolt and Jack Bracket on HappiJac Swing Out # LC182496  

Yes the Happijac swing out bracket kit part #LC182496 does work with your camper with a set of Happjac truck camper jacks and would also work/be needed for your 2021 Ram truck that is a dually.

With dually trucks I recommend the Swing Out Extension Brackets #LC182496 with the HappiJac Manual Truck Camper Jack System #LC736515-4. This is due to the Brophy Heavy Duty Cable Camper Jacks #CX74 having to sit under the lip of the camper. Since…

The Swing Out Extension Brackets for HappiJac Truck Camper Jacks part #LC182496 is the way to go as the 382819 HD are no longer produced. From what I've gathered they were the same width but had a stronger build for heavier campers. They are no…

The only application we offer swing out brackets for are HappiJac truck camper jack systems like part #LC736515-ELKIT. If this is what you have then you can use Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems part #LC182496 to…

Truck campers are certainly a cool, niche way to go rv'ing, and I can understand why you'd want some additional clearance getting past that wheel well on your dually Ford F-350 to make the experience even more enjoyable. The #LC182496 hinge…

I recommend using the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems item #LC182496 and the HappiJac Fixed Extender Bracket for Dual Wheel Chassis Truck Camper Jacks item #HJ54FR. The fixed extenders are only 5" wide apiece.…

The length of the HappiJack Swing-Out Extender Bracket #HJ54FR is 16 inches, the width is 5 inches, and the distance between the mounting holes is 7-1/2 inches. I went ahead and attached a diagram of the dimensions to this question as well as a video…

Thanks for the picture! I would be happy to help you Yes, you are correct in assuming you will only need one set of the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems Item #LC182496. These come in pairs and you will not need them…

The Swing Out Extension Brackets part #LC182496 which are for HappiJac Truck Camper Jacks will add approximately 3-1/2" - 4-1/2" of clearance to the existing jacks per side. This can then be used to determine compatibility. I would…

The distance between bolts on the HappiJac #LC182496 Jack System, measured center-on-center is 7-1/4" inches and 17" overall length. I have attached a drawing with measurements.

Hello Bart, thanks for reaching out. I can definitely point you in the right direction, but I will need a bit more information on your truck before I can recommend the correct tie downs. Can you please answer the following questions for me? 1. What…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…