How Much Of An Extension Does the Swing Out Extension Brackets for HappiJac Truck Camper Jacks Give  

The only application we offer swing out brackets for are HappiJac truck camper jack systems like part #LC736515-ELKIT. If this is what you have then you can use Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems part #LC182496 to…

From the pivot bolt to the jack bracket on the Swing Out #LC182496 there is a distance of just about 4-1/2".

The Swing Out Extension Brackets for HappiJac Truck Camper Jacks part #LC182496 is the way to go as the 382819 HD are no longer produced. From what I've gathered they were the same width but had a stronger build for heavier campers. They are no…

The length of the HappiJack Swing-Out Extender Bracket #HJ54FR is 16 inches, the width is 5 inches, and the distance between the mounting holes is 7-1/2 inches. I went ahead and attached a diagram of the dimensions to this question as well as a video…

The distance between bolts on the HappiJac #LC182496 Jack System, measured center-on-center is 7-1/4" inches and 17" overall length. I have attached a drawing with measurements.

Truck campers are certainly a cool, niche way to go rv'ing, and I can understand why you'd want some additional clearance getting past that wheel well on your dually Ford F-350 to make the experience even more enjoyable. The #LC182496 hinge…

With dually trucks I recommend the Swing Out Extension Brackets #LC182496 with the HappiJac Manual Truck Camper Jack System #LC736515-4. This is due to the Brophy Heavy Duty Cable Camper Jacks #CX74 having to sit under the lip of the camper. Since…

I recommend using the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems item #LC182496 and the HappiJac Fixed Extender Bracket for Dual Wheel Chassis Truck Camper Jacks item #HJ54FR. The fixed extenders are only 5" wide apiece.…

Thanks for the picture! I would be happy to help you Yes, you are correct in assuming you will only need one set of the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems Item #LC182496. These come in pairs and you will not need them…

Hi KJM; assuming you have the factory trailer hitch the correct TorkLift camper tie-downs for your 2024 Sierra 3500 dually is the Custom Fit Tie Down Kit With TL44FR | TL84FR #TL94PR. This will fit with that built-in step you're referring to as…

This will depend on if you have a Dually #TL94PR or Single #TL67DR rear wheels on your 2021 Chevrolet Silverado 3500 long bed. These are a fit for the factory receiver, if you have or want to switch to a TorkLift Receiver #TL74FR this would use a…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…