Parts Needed to Tow Trailer with 2013 Kia Sorento LXI4
Question:
I am buying a Harbor Freight trailer, and it says it hooks to a 1 7/8” ball hitch. I am new to all this. Are these part numbers what I need to order? Plan to tow a 150 lb 10 foot long bass boat. Is there anything else I should add? Thanks 36511 Mounts to car C56328 Wiring kit for my 2013 Kia Sorento LXI4 36051 Drawbar for 1 1/4” hitch 19256 1 7/8” hitch ball
asked by: Bob
0
Expert Reply:
Everything you mentioned would be all you need to tow the trailer you mentioned. The Draw Tite hitch # 36511 is a confirmed fit for your 2013 Kia Sorento as well as the Curt trailer wiring harness # C56328. The ball mount # 36051 is the correct one to use and so is the hitch ball # 19256.
expert reply by: Jameson C
0
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 1 Inch
- Rise - 1 Inch
- Fits 1-1/4 Inch Hitch
- Class II
- 3500 lbs GTW
- Draw-Tite
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Similar Expert Q&A Pages
- How is the Spare Accessed when a Draw Tite Hitch # 36511 is installed on 2012 Hyundai Santa Fe
- Curt Hitch Recommendation for a 2012 Kia Sorento that is Compatible with a Full Size Spare
- Solution for Weld Nuts on 2012 Hyundai Santa Fe that Won't Allow Hitch Bolts to Thread In
- Does the Draw Tite hitch # 36511 Block Spare from Being Raised or Lowered
- Does the Class II Draw-Tite Trailer Hitch Install the Same as the Class III on a 2012 Kia Sorento
- Recommended Towing Package For 2011 Kia Sorento 4 Cylinder
- Hitch Classes Available for a 2013 Kia Sorento 4 Cylinder
- What Kind of Hardware is Included w/ the Draw-Tite Hitch for a 2010 Hyundai Santa Fe?
- Trailer Hitch Recommendation for 2011 Hyundai Santa Fe for Thule Bike Rack