Troubleshooting Movement Using Curt X5 Adapter on B&W Gooseneck Base  

Yes. You will measure from the tail gate end of your truck bed floor by hooking a tape measure over the end of the truck box and mark the floor at 47-inches. This will provide you the exact location for your ball. See step 1 on the installation…

I spoke with my B&W representative who confirms that to install their GNRK1121 #BW77FR Turnover Ball hitch on a 2021 Ford F-150, the center of the 4 inch hole for the gooseneck ball would be placed 42-5/8 inches forward of the rear edge of the…

I reached out to my contact at Curt Manufacturing to see what could cause your issue with the Curt X5 #16310. He said that sometimes there is a very small amount of difference needed to get that pin to lock and that even a thick bedliner could cause…

Correct, the Curt #16310 will not fit in your 2017 Ford F250 with your turnover ball. Here is the Demco Alternative #DM6140. This one works with B&W Turnoverball gooseneck trailer hitches and is Compatible with Demco Hijacker Premier Series,…

The only difference between Item #C16220 for EZr hitches and Item #C16210 for Curt double lock hitches is the shaft on Item #C16220 is going to be 3/8" longer than the shaft on Item #C16210. I would not recommend trying to use Item #C16220 on a…

Easiest way to tell which gooseneck hitch you have is by looking at the safety cable loops. If they are about as wide as the gooseneck ball hole and are centered with the ball hole it's an EZr, if the safety chain loops are a smaller and offset…

Thanks for the pictures and congrats on the new trailer! You are correct the Gen-Y item #GY98GR would be the correct adapter for your Jayco Eagle. This system replaces the Lippert Rhino pin box and has the extra pin weight capacity you will need. I…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The Curt Double Lock #C60720 and the Curt EZr Double Lock #C60683 are basically the same gooseneck hitch. The difference is in the installation. The EZr gives you the ability to ensure the hole you drill in the bed is perfect without the need to…

The Curt X5 5th Wheel Base Rails Adapter for Curt Double Lock part #C16210 and Curt X5 5th-Wheel Base Rail Adapter Plate for EZr part #C16220 are very similar, but not the same. The shaft is a bit longer on the EZr model so it won't work…

If you could send me a picture of the gooseneck hitch you have installed in your 2017 GMC Sierra 2500 then I would be able to make a more educated guess but based on your description you have the Curt Double Lock Gooseneck Hitch part #C607-604 and…