What Size Wrench to Hold Wrench Flat of Curt Ball of Ball Mount # C45036
Question:
If you have to flip it over to rise the ball height you have to remove the ball, flip it and torque it down again. What is the torque spec? The nut is a 1.5inch size but what is the wrench size for the ball side to prevent it from spinning? Thanks.
asked by: Paul T
0
Expert Reply:
Typically people use a large crescent wrench to hold the wrench flats on the ball of the # C45036 but if you wanted a dedicated wrench you'd want a wrench in the size of 1-1/2 inch. You'd want to tighten the nut of the hitch ball to 250 ft lbs.
expert reply by: Jameson C
0
Product Page this Question was Asked From
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- Class III
- 7500 lbs GTW
- CURT
more information >
Similar Expert Q&A Pages
- Recommended Trailer Hitch And Wiring To Tow A Trailer With A 2022 Hyundai Tucson Sport
- Can The Curt Ball Mount Be Used In The Rise Position.
- Is There a Shorter Shank Option for Curt Fixed Ball Mount with 2 Inch Drop
- Can Curt Ball Mount # C45036 be Used in Rise Position
- Troubleshooting 2 Inch Ball Mount that Fits Too Tight In Vehicle Receiver
- What is the Torque Spec for the 2" Hitch Ball That Comes with the Curt Class III Ball Mount # C45036
- Draw Bar and Hitch Ball for 2012 Toyota Highlander
- Best Trailer Towing Setup for a 2006 Nissan Murano
- 2 inch Hitch Ball and Ball Mount
- What is the Wall Thickness of the Curt Class III Ball Mount Part # C45036
- How To Select A Ball Mount For Towing A Trailer
- Can a Ball Mount Rated for 7,500 lbs be Used with a Trailer Hitch Rated for 6,000 lbs
- Recommended Ball Mount with to Tow a Trailer Level that Needs 1 Inch of Drop
- Type of Wrench to Use to Remove Hitch Ball of Curt Ball Mount # C45036
- Will Curt Ball Mount C45036 Fit Factory Trailer Hitch Receiver On 2002 Toyota Tundra?
- How to Choose the Correct Ball Mount for a 2018 Honda Ridgeline
- Does 2 Inch Hitch Ball Come Pre-Installed on Ball Mount
- Does the Curt Ball Mount with 2 Inch Ball Come Torqued to the Correct Tightness
- How to Loosen the Nut Holding a Ball on a Ball Mount
- Choosing Ball Mount for 2015 Ford Escape to Tow Tent Trailer
- Part Needed for Ball Mount to Allow Friction Sway Control to be Used on Driver Side
- How to Pick Out Ball Mount for Trailer Hitch
- Will Curt C45036 Ball Mount Work in OEM Hitch on 2004 Toyota 4Runner
- Will Longer Ball Mount Increase Turning Clearance for Small Trailer When Backing Up?
- Recommended Ball Mount Kit For 2015 Ford Explorer
- Is Curt Class III Ball Mount Compatible with 2 inch Hitch Receiver on 2000 Ford F-150
- 2 inch Hitch Ball Mount Recommendation with 2 inch Drop
- Choosing a Ball Mount for 2013 Toyota Venza with Class III Trailer Hitch to Tow Boat Trailer