Weight of TorkLift TLE1648 48 Inch Cannon Hitch Extension

Question

Question:

What is the actual weight of the hitch extension itself?

asked by: Scott S

1

Helpful Expert Reply:

The TorkLift # TLE1648 Cannon Hitch Extension weighs in at just over 75 lbs. I've linked to a product description video featuring the Torklift # TLE1648. Along with the hitch extension, you'd also need the # TLW6048 wiring harness extension.

expert reply by: Mike L

1

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Hi Dennis; you aren't going to find information on the static load listed from the roof rack manufacturers. Our general guidelines for tents like the #Y79XR are that the roof rack must have a minimum load capacity of 165 lbs which this rack does…

view full answer...

Answer 5

Having the puck system is a great feature. If you ever plan on loading the bed with mulch, sand or rock you'll quickly find that having rails permanently bolted to the bed floor is a real pain. Not only that, but the pucks look a lot better.…

view full answer...

Answer 6

Great questions! Reese actually makes the OEM puck system for Ford so if the 2022 F-250 is cheaper by a lot then I recommend going that route and installing the Under-Bed Rail and Installation Kit #RP87FR. The only thing you'll really be missing…

view full answer...

Answer 7

I went ahead and verified for you the exact 7,500 lb Air Lift air bags that fit your 2024 Ford F-350 4WD with single rear wheels (glad you mentioned that info because there isn't a kit for duallies), and what you need is the following part: - Air…

view full answer...

Answer 8

What I think you are asking is, will you need a slide type hitch for the 2022 Ford F-250 Super Duty with the short bed, 6-3/4' length that has the OEM Prep Package (puck system) when towing a 5th wheel RV. The short answer is no you do not have…

view full answer...

Answer 9

The two parts you mentioned are both the same Reese Elite Series Under-Bed Rail and Installation Kit that fit your 2021 Ford F-350 Super Duty, giving you the ability to pull a gooseneck trailer with a gooseneck ball or use a 5th wheel hitch in the…

view full answer...

Answer 10

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 11

Hi Adam, The Brophy Stake Pocket Mounted Camper Tie-Downs #TDSF don't technically have a weight capacity, though the turnbuckles they need, the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs #TDHP, have a 3,000 lb weight capacity. So…

view full answer...

Weight of TorkLift TLE1648 48 Inch Cannon Hitch Extension

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching