Replacement Voyager RV LCD Monitor VOM-718

Question

Question:

my motorhome has a Voyager AOM-713 rearview monitor, 3 camera input. will your item V034FR be a direct replacement VOM-718 ?

asked by: Daniel S

0

Expert Reply:

Yes the Voyager RV LCD Observation Monitor part # VO34FR is the exact same as the VOM-718 that you have now so it would work great as an exact replacement.

expert reply by: Jameson C

0

Answer 1

The Voyager RV Backup Camera Monitor #VOM719WP has a quad screen display that allows you to observe 4 camera angles simultaneously around your RV or camper. You will have to splice a few wires but since they are all labeled its a super easy…

view full answer...

Answer 2

The Voyager RV LCD Observation Monitor part #VO34FR is a direct replacement for the Voyager AOM713 Monitor and it will work with all your existing cameras and cables.

view full answer...

Answer 3

I have a solution for you but none of the current monitors are compatible with the wiring of your Voyager AOM 681 monitor. I recommend the Furrion Vision S Wireless RV Backup Camera System with Night Vision item #FOS43TASF. This is a wireless backup…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

I would be happy to! We have quite a few options for TRUE Frame Mounted Torklift camper tie downs for a 2015 Ford F-250. I have listed our entire selection below because there are several different ones depending on what model and accessories your…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Ronnie, the Voyager Monitor #VOM719WP will replace your AOM-7694 monitor per Voyager, but you will have to splice the existing wires from your AOM-7694 to the new Voyager Monitor. There is no direct plug and play replacement monitor.

view full answer...

Answer 11

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 12

The Voyager monitor part #VOM719WP will work great as a replacement monitor for what you have now with the AOM-7694.

view full answer...

Replacement Voyager RV LCD Monitor VOM-718

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching