Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity
Question:
Will this axel fit my 4x8foot harbor freight trailer?
asked by: Joseph
Expert Reply:
The Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs # T20BTR-EZ-6048 will fit any trailer with spring seats 48 inches on center. If you Harbor Freight trailer has leaf springs that are 48 inches on center then you will have a perfect fit. You will want to note that the hub face to hub face will be 60 inches.
If those dimensions are not a fit, then you may want to consider using the CE Smith Trailer Axle w/ Idler Hubs - EZ Lube Spindles - 5 on 4-1/2 - 57-1/2" Long - 1.8K # CE33201GA-HUB which have spring centers at 46-1/2 inches on center.
Your trailer carrying capacity will depend on all the components and not only the axle, so the weakest component weight rating will be your maximum trailer weight.
Products Referenced in This Question
CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- Idler Hubs
- 1800 lbs
- 5 on 4-1/2 Inch
- 46-1/2 Inch Long
- 57-1/2 Inch Long
- No Drop or Lift
- CE Smith
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- EZ Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 25mm hub
- Shop: Dexter Idler Trailer Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
- Article: Trailer Tire Sizing
- Shop: Kenda Karrier ST145/R12 Radial Trailer Tire with 12" Black Mod Wheel - 5 on 4-1/2 - LR D
- Shop: Dexter Trailer Idler Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Malone Crossbar Conversion Kit for Standard Utility Trailer
- Video: Complete Breakdown of the U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles
- Q&A: Upgrading Trailer Tires and Wheels For Highway use on Harbor Freight 4x8 Folding Trailer
- Shop: Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Q&A: How to Determine the Right Air Pressure to Fill a Trailer Tire
- Q&A: Replacement Axle for Harbor Freight Utility Trailer
- Q&A: Should Trailer Axle have Bend In it that Faces Downward
- Search Results: 480x12 tire and rim
- Search Results: thinline
- Search Results: haul master
- Q&A: 1000 lb Capacity Slipper Springs For 400 lb Sailboat Trailer To Ease Rigid Ride
- Q&A: What Is The Width Of The Base For The Malone Crossbar Conversion Kit?
- Video: What to Know About the Trailer Idler Axle Beam with Easy Grease Spindles
- Search Results: lowering kit
- Search Results: drop axle
- Search Results: dexter hub
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Video: Complete Breakdown of the Trailer Axle with Idler Hubs
- Q&A: Axle Upgrade for my Harbor Freight 1720 Utility Trailer
- Shop: Roof Rack
- Video: Malone Crossbar Conversion Kit for Standard Utility Trailer: The Breakdown
- Video: All You Need to Know About the Malone TopTier Load Bar Kit for Utility Trailers