Lift Kit for Single Square Torsion Axle on Little Guy Max Travel Trailer

Question

Question:

Is there a lift kit for my Little Guy Max travel trailer?

asked by: Ken F

0

Expert Reply:

Thanks so much for the photos, and based on those, your 2018 Liberty Outdoors Little Guy Max travel trailer has a 3,500 lb Lippert square torsion axle, for which we do have the correct lift kit, which is the following:

- Axle Riser Kit - Single Square Torsion Axle # LC382741

This will give you the extra ground clearance you need, adding a 3-1/2 inches of lift to your trailer.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The brake controller install harness on your 2022 Jeep Grand Cherokee 4xe is under the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. The Tekonsha brake controllers like the Prodigy P3 part #90195…

view full answer...

Answer 2

You definitely don't have enough clearance so it is a wonder your wheels don't rub under suspension travel over bumps. Since your 2019 Little Guy Max travel trailer has torsion axles, the correct fit for that size is the Torflex Lift Kit -…

view full answer...

Answer 3

Yes you certainly can. In order to bolt-on a set of metal weld-on fenders such as the Single Axle Trailer Fender part #HP29VR you will need a set of mounting brackets such as the Mounting Brackets for Trailer Fender part #CE26098G-2. If you do not…

view full answer...

Answer 4

It sounds like you are looking for a spare tire carrier to use on the a-frame portion of your Little Guy Trailer. If that is the case then I do have an option for you but the Folding, Bumper Mounted Tire Carrier part #TR-2 won't work as it is…

view full answer...

Answer 5

The correct axle riser kit for your Lippert Torsion Axle is the part #LC382741. I confirmed with my contact at Lippert that the spacing for the mounting will match up and it is compatible with your mounting holes being on the top.

view full answer...

Answer 6

I attached a link to this page that has the install instructions for the Axle Riser Kit #LC382741 that you referenced.

view full answer...

Answer 7

To lift your Little Guy 5 trailer, you will want to use the Dexter Axle Torflex Lift Kit - Single Axle #K71-707-01. This will lift your axle to give you an additional 2-5/8 inches of ground clearance on your trailer.

view full answer...

Answer 8

Lippert cannot say if their #LC382741 lift kit would be compatible with your #10 Dexter Torflex alxe. The tallest single-axle Dexter kit we offer is part #K71-707-01 which would provide you with 2-5/8 inches of lift. Ironically, Dexter also…

view full answer...

Answer 9

The washers that come with the Axle Riser Kit - Single Square Torsion Axle - 3-1/2" Lift part #LC382741 are not lock washers. The mounting bolts need to be torqued down to 120 ft-lbs, as long as you torque them down to the 120 ft lbs in the…

view full answer...

Answer 10

The Axle Riser Kit - Single Square Torsion Axle part #LC382741 will lift both sides of the trailer frame up 3-1/2" to add clearance between the frame and the axle. To install the axle riser kit you want to raise the trailer one side at a time by…

view full answer...

Answer 11

If you have a Lippert 3,500 lb Square Torsion Axle then the correct lift kit is the Axle Riser Kit part #LC382741. That said, none of the Dexter Torflex Lift Kits like part #K71-725-02 will work.

view full answer...

Answer 12

When choosing the correct weight distribution system for your trailer, you'll want to consider what the fully loaded weight of the trailer will be; the tongue weight should be anywhere between 10% and 15% of that when loaded. For reference, the…

view full answer...

Lift Kit for Single Square Torsion Axle on Little Guy Max Travel Trailer

Continue Researching