Availability of Gen-Y Torsion Style Adjustable Ball Mount with Over 20k Capacity  

The Gen-Y Torsion 2-Ball Mount #325-GH-1324 is going to be the adjustable ball mount which gives you the greatest distance from your hitch pin hole center. From the furthest hole center to ball center this is 16" length. That is 2-3/4"…

The Gen-Y Torsion 2-Ball Mount #325-GH-1324 is a beast. If your 2017 Ford F-250 has a 2-1/2 inch receiver opening then you will not be disappointed with this ball mount. If you want something that isn't going to break then you will not be…

I recommend the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers #325-GH-1324 as being the best way to extend your hitch ball on your F-250. Currently we do not have any 12-14" extenders that are rated to tow the 8,000lbs you are needing to tow.…

The weight of the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 6" Drop/Rise - 21K #325-GH-1324 is 115 lbs.

The distance will be 12-1/4 inches from the bottom of your 2-1/2 inch receiver to the bottom of the Gen-Y torsion ball mount you asked about, which is the following part number: - Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch -…

Yes, you can use a weight distribution hitch system in one of the Gen-Y Stacked Torsion Receivers like #325-GH-1325. The Gen-Y receivers are extraordinarily solid and have a very high capacity - this one is rated for 21,000-lbs. This particular…

The best option for larger trucks is without a doubt an adjustable ball mount that way you aren't stuck with a fixed ball mount that only works on certain trailers. The best option for this if you have the larger 2-1/2" receiver tube is the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…