Wire Size and Amperage Rating of the Hopkins 12-Volt Power Socket with Power Wire and Fuse Assembly

Question

Question:

What is the wire size and how many amps can it handle safely?

asked by: Bud

0

Expert Reply:

The wire size of the Hopkins 12-Volt Power Socket with Power Wire and Fuse Assembly # HM55115 is 14 gauge and the amperage rating of the fuse is 20 amps. So as long as you stay under 20 amps this product should work well for you.

expert reply by: Jameson C

0

Answer 1

The best option I have to install a 12 volt power outlet in a truck bed would be to use the Hopkins 12-Volt Power Socket with Power Wire and Fuse Assembly part #HM55115 and wire this directly to the battery. This would need to be wired directly to…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hey Ray, thanks for the photo and explanation! Lippert has a variety of replacement parts that look like they might work, but when I reached out to my contact to verify what would be the correct piece they said you have an older system and the parts…

view full answer...

Answer 4

Hey Andy! The premium lighting group that Jeep offers for the 2021 Grand Cherokee Limited won't affect which diode wiring kit you need. The option that will determine the correct one is whether or not your Jeep has the Parksense Proximity…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The roof rack I recommend for a 2020 Jeep Grand Cherokee Trailhawk is the Rhino-Rack RVP Roof Rack part #RRRVP27. The Rhino-Rack RVP installs using fixed mounting points inside the flush side rails therefore you will get a very clean look with simple…

view full answer...

Answer 7

Currently Lippert only offers the Replacement Motor with Box Brackets #LC369473 for your Kwikee 42 Series Steps #LC372779. In the event your steps were made in 1999 or earlier you will need to use the Motor Upgrade Kit #LC380266 to have the updated…

view full answer...

Answer 8

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 9

Since you have a pre-1999 Kwikee Series 42 RV step the correct upgrade kit you'd need is the part #LC380266 which comes with the type of motor you are wanting as well as all of the electronics needed as well.

view full answer...

Answer 10

Sounds like you are looking for the replacement table for your Kwikee Series 42 steps which would be part #LC372749 as well as the slides #LC369690 and you'd be set.

view full answer...

Answer 11

I reached out to the manufacturer, who told me the correct part for the conversion kit is the Lippert Components Kwikee Step KIT CONV 42 SER 9510 CNTRL MOTOR (909777000) #LC380266.

view full answer...

Answer 12

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Wire Size and Amperage Rating of the Hopkins 12-Volt Power Socket with Power Wire and Fuse Assembly

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching