Does Lippert Power Stance Electric Camper Jack Come with 7-Way Plug?  

It's a smart idea to go from a manual A-frame jack to an electric jack because it is so much easier, and there is a great option that will work for your travel trailer that makes using the jack super simple. The jack I recommend for you is the…

The power wire for your Lippert Electric jack should be run to a dedicated 12v battery in your trailer, but it sounds like you have it wired to the break away switch battery. I recommend unwiring it from the break away switch battery as if you drain…

Hey Rick, thanks for reaching out! I'm guessing the 90" dimension is the width of your trailer door so for your application I recommend the Conventional Ramp Door Spring #M394FR because it has a 185 lb weight rating. This means that…

Hey Paul, the most similar weight distribution shank we have to the part #RP69FR that fits a 2-1/2 inch hitch is the part #BPH75RR which fits the same heads as the Reese shanks so it will also work with same heads.

The rule of thumb for estimating a tongue weight is 10-15 percent of trailer weight. A 4,600 pound trailer would have a tongue weight between 460 and 690 pounds. Somewhere between a 1,000 to 2,000 pound capacity jack would be fine. Having a jack that…

The Lippert Power Stance Electric Trailer Jack with Footplate #LC89VR will fit your 2023 Coachmen Apex Nano 194BHS. It actually fits any trailer with an A-frame and the standard jack bolt pattern so it is pretty universal.

Because of its functionality with the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System #LC672136 you do need to replace the 421366 tongue jack with another one. The correct part is the following: - Replacement Tongue Jack…

I took the Ultra Faucets RV Shower Valve w/ Vacuum Breaker #277-000024 apart and found that the cartridge only fits one way and they make the valves so that you wouldn't be able to disassemble and rotate the connection to the bottom. Since…

We have an 8 foot ramp door spring that has dual torsion springs like you asked about with the part #M394FR. This is the hand wound torsion style spring you mentioned.