bing tracking image
Q & A Icon

Brakes, Hubs, and 7-Way Plug for Viking Popup Camper

Question:

1. bearing numbers: L44649 It looked like L44G49 but I assume it's a ...649. It also looks like it has VPZ-15-MRI on it also. ( I can try to get the spindle measurement but mine don't have the A-F points like I see on the diagram) 2. The brake drum has Dexter 8-247 stamped on it. Also says Hub Rim Diameter 10 09 3. Also would like to replace the dust cap and boot but did not see numbers on either 4. The tires are ST175/80D13. The wheels are 5 on 4.5" bolt pattern. I may not need the wheels 5. Pretty sure it's a 7-way connector but am attaching photos just in case. Can you get me the price for a new connector as well? The piece in the photo is what I'm needing not the car connection. 6. I'd like to get a price on the left rear trailer jack. I included a photo but did not see any part numbers.

0

Expert Reply:

We can most likely help with what you need but we need more info from you to pick out what you need.

For hub/drum replacements I need to get the bearing numbers from your old hubs or the dimensions of the spindle on your trailer axle. From there we will be able to determine which brake assemblies you'd need.

Then for wheel and tires I need the bolt pattern of your wheels and the tire size that's on the sidewall as well. Do you have a 4-way or a 7-way connector?

expert reply by:
0
Jameson C

Question:

We recently purchased an old pop-up camper and I need to replace several parts. Im ok finding car parts but Im clueless with this thing if you could please help? 1998 Viking 2470ST I know I need the following: Parts for a complete brake rebuild Wheel bearings Tires and wheels The socket that plugs into the truck for lights and brakes This is just the start. Thanks for your time!

0

Expert Reply:

Based on the hub part number you found the correct hub/drum replacement you'd need is the # 8-247-50UC3. If you wanted just the bearings the kit you'd need is the part # BK2-100.

For new brake assemblies you'd want the part # AKEBRK-35.

For a new 7-way plug and harness you could then use the part # 277-000143.

expert reply by:
0
Jameson C

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>