Will the Curt A25 Hitch Fit in Industry Standard Base Rails

Question

Question:

I need to know if this hitch will attach to my Pullrite rail that is set up for my 2017 Ram 3500?

asked by: Danny L

0

Expert Reply:

As long as your Pullrite rail kit provides you with industry standard base rails to mount a 5th wheel hitch, the Curt A25 # C16180 will fit, since it's designed to fit in industry standard base rails. I've attached a photo of the dimensions for industry standard rails that you can compare yours to.

expert reply by: Erik B

0

click to enlarge

Answer 1

It sounds like you might be bit overwhelmed with the amount of options available for your 2018 Ram 3500, which I can certainly understand! For your particular setup I highly recommend the Curt Q24 5th Wheel Trailer Hitch #C16546 along with the Custom…

view full answer...

Answer 2

For A 2021 Ram 3500 you can use the Curt Universal Fifth Wheel Base Rails with Installation Kit - Gloss Finish #C16100 but they will require drilling into your frame so I recommend the Curt Custom Fifth Wheel Installation Kit for Ram #C16430-204…

view full answer...

Answer 3

Though I do need to start by saying the highest rated fifth wheel hitch available for a 2019 Ram 3500 long bed with the factory puck system will be the Reese M5 5th Wheel Trailer Hitch #RP37FR, which is rated to 27,000 pounds, I can still compare the…

view full answer...

Answer 4

Yes, the Curt PowerRide 5th Wheel Trailer Hitch #C22ER will absolutely work with Reese above bed base rails.

view full answer...

Answer 5

The Demco Recon 5th wheel trailer hitch #DM8550043 tabs that fit in the rails are 21-15/16 inches apart on center. The measurement given by manufacturers is almost always listed as 22 inches. I went ahead and pulled the hitch and measured it at just…

view full answer...

Answer 6

From what I was able to find, your Lil' Rocker hitch used industry standard rails. In theory you would be able to use any 5th wheel hitch that mounts to industry standard rails like the B&W Patriot 5th Wheel Trailer Hitch #BWRVK3255. I do…

view full answer...

Answer 7

The Demco Recon 5th wheel trailer hitch #DM8550043 mounts in industry standard above the bed 5th wheel rails. Side to side it will fit the center slots in the rails which are 20-1/2 inches apart on center. And front to back ISR rails are a little…

view full answer...

Answer 8

In order to install a Curt fifth wheel hitch on a 2015 Ram 3500 you'll need the Curt Custom Fifth Wheel Installation Kit for Dodge Ram part #C16430-204. I don't recommend using any sort of universal kits as they require drilling into the…

view full answer...

Answer 9

I have attached a drawing from the installation instructions for the rail kit part #C16430-204 you can check out. As you can see in the attached drawing I noted the carriage bolts and where they are located on the rails when installing. Please note…

view full answer...

Answer 10

Yes, you can use the same 5th wheel hitch but you will need a different installation kit for the new truck. For your new 2013 Dodge Ram 3500 long bed you can use Curt installation kit #C16430-204. This installation kit will accept the Husky 5th wheel…

view full answer...

Answer 11

Yes, the Curt Custom Fifth Wheel Installation Kit part #C16430-204 has been confirmed to fit a 2019 Ram 3500. This kit is a custom fit kit so no drilling into the frame is required.

view full answer...

Answer 12

The correct Curt Custom Fifth Wheel Installation Kit for a 2020 Ram 3500 is part #C16430-204. The Curt Custom Fifth Wheel Installation Kit is a custom bolt-on fit with no cutting or drilling required into the frame. If you don't already have a…

view full answer...

Will the Curt A25 Hitch Fit in Industry Standard Base Rails

Product Page this Question was Asked From

Continue Researching